516890
119
Zoom out
Zoom in
Previous page
1/171
Next page
CONFIGURATIONS Configuring various functions (Setup menu) En 119
Initial Volume
Sets the initial volume when the receiver is turned on.
Settings
Pure Direct Mode
Selects whether to output video signals during the Pure Direct mode (p.68).
Settings
Adaptive DSP Level
Selects whether to automatically adjust the CINEMA DSP effect level.
Settings
Video
Configures the video output settings.
Analog to Analog Conversion
Enables/disables the video conversion (p.156) between the analog video jacks
(COMPONENT VIDEO, S VIDEO and VIDEO).
Settings
This function works only when “Monitor Out Assign” (p.126) is set to “Main” (default) and “HDMI OUT2
Assign” (RX-A3020 only) (p.127) is set to “Main” (default) or “Zone4”.
The unit does not convert 480-line and 576-line video signals interchangeably.
Only 480i/576i-resolution video signals can be output from the S VIDEO and VIDEO jacks (p.156).
Video Mode
Enables/disables the video signal processing (resolution, aspect ratio and video
adjustments).
Settings
When “Video Mode” is set to “Direct”, the unit transmits video signals with the least circuitry in order to
reduce video output delay.
Off (default)
Sets the level to the volume level of the unit when it last entered
standby mode.
On
Sets at Mute or the specified volume level (-80.0 dB to +16.5 dB, 0.5
dB increments).
(Specify a volume level which is lower than the “Max Volume” setting.)
Auto (default)
Automatically outputs video signals when any videos are input from
the selected input source or an input source that can be operated with
the on-screen display is selected. When no video signals are input,
the wall paper is displayed.
Video Off Does not output video signals including the wall paper.
Off Does not adjust the effect level automatically.
On (default)
Adjusts the effect level automatically according to the YPAO
measurement results and the volume level.
Off Disables the video conversion between the analog video jacks.
On (default)
Enables the video conversion between the analog video jacks.
Converted video signals are output from the MONITOR OUT jacks
only.
Direct (default) Disables the video signal processing.
Processing
Enables the video signal processing.
Configure the settings in “Resolution”, “Aspect” and “Adjustment”.
119


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha RX-A2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha RX-A2020 in the language / languages: English as an attachment in your email.

The manual is 17,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha RX-A2020

Yamaha RX-A2020 Quick start guide - English - 58 pages

Yamaha RX-A2020 User Manual - German - 171 pages

Yamaha RX-A2020 User Manual - Dutch - 171 pages

Yamaha RX-A2020 User Manual - French - 171 pages

Yamaha RX-A2020 User Manual - Italian - 171 pages

Yamaha RX-A2020 User Manual - Swedish - 171 pages

Yamaha RX-A2020 User Manual - Spanish - 171 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info