492656
105
Zoom out
Zoom in
Previous page
1/151
Next page
En 105
Configuration
Configures the output characteristics of the speakers.
When you configure the speaker size, select “Large” if the woofer diameter of your speaker is 16 cm or
larger or “Small” if it is smaller than 16 cm.
Front
Selects the size of the front speakers.
Settings
“Front” is automatically set to “Large” when both “Subwoofer 1” and “Subwoofer 2” are set to “None”.
Center
Selects whether or not a center speaker is connected and its size.
Settings
Surround
Selects whether or not surround speakers are connected and its size.
Settings
Surround Back
Selects whether or not surround back speakers are connected and its size.
Settings
“Surround Back” is automatically set to “None” when “Surround” is set to “None”.
Front Presence
Selects whether or not front presence speakers are connected.
Settings
Rear Presence
Selects whether or not to rear presence speakers are connected.
Settings
“Rear Presence” is automatically set to “None” when “Surround” or “Front Presence” is set to “None”.
Large
Select this for large speakers.
The front speakers will produce all of the front channel frequency
components.
Small (default)
Select this for small speakers.
The subwoofer will produce front channel components lower than the
specified crossover frequency (default: 80Hz).
Large
Select this for large speaker.
The center speaker will produce all of the center channel frequency
components.
Small (default)
Select this for small speaker.
The subwoofer will produce center channel components lower than the
specified crossover frequency (default: 80Hz).
None
Select this when no center speaker is connected.
The front speakers will produce center channel audio.
Large
Select this for large speakers.
The surround speakers will produce all of the surround channel
frequency components.
Small (default)
Select this for small speakers.
The subwoofer will produce surround channel components lower than
the specified crossover frequency (default: 80Hz).
None
Select this when no surround speakers are connected.
The front speakers will produce surround channel audio. Virtual
CINEMA DSP works when you select a sound program.
Large x1
Select this when 1 large speaker is connected.
The surround back speaker will produce all of the surround back channel
frequency components.
Large x2
Select this when 2 large speakers are connected.
The surround back speakers will produce all of the surround back channel
frequency components.
Small x1
Select this when 1 small speaker is connected.
The subwoofer will produce surround back channel components lower than
the specified crossover frequency (default: 80Hz).
Small x2
(default)
Select this when 2 small speakers are connected.
The subwoofer will produce surround back channel components lower than
the specified crossover frequency (default: 80Hz).
None
Select this when no surround back speakers are connected.
The surround speakers and subwoofer (or front speakers) will produce
surround back channel audio.
Use (default) Select this when front presence speakers are connected.
None Select this when no front presence speakers are connected.
Use Select this when rear presence speakers are connected.
None (default) Select this when no rear presence speakers are connected.
105


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha RX-A2010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha RX-A2010 in the language / languages: English as an attachment in your email.

The manual is 13,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha RX-A2010

Yamaha RX-A2010 Quick start guide - English - 8 pages

Yamaha RX-A2010 User Manual - Dutch - 151 pages

Yamaha RX-A2010 Quick start guide - Dutch - 8 pages

Yamaha RX-A2010 User Manual - Danish - 151 pages

Yamaha RX-A2010 User Manual - French - 151 pages

Yamaha RX-A2010 User Manual - Swedish - 151 pages

Yamaha RX-A2010 User Manual - Spanish - 151 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info