588952
49
Zoom out
Zoom in
Previous page
1/60
Next page
43
reface CS/DX/CP/YC Owner’s Manual
Appendix
Local Control
For setting whether to internally disconnect (“off”) or connect (“ON”) the instrument’s internal tone
generator and keyboard. If you wish to control your reface’s internal tone generator by using an
external MIDI controller but not its keyboard, set MIDI Control to “ON” and Local Control to “off.
Factory default setting: ON
Display when set
Sustain (reface DX and reface CP)
For switching the sustain setting. If you have connected a foot pedal (FC3) or a foot switch (FC4 or
FC5) to the instrument, you will need to set either “FC3” or “FC4/5” depending on whether or not it
supports half-damper operation.
Factory default settings:
DX: FC4/5 (an FC4 or FC5, or an FC3 without half-damper operation)
CP: FC3 (an FC3 with half-damper operation)
Display when set
Transmit Channel (reface CS and reface DX)
For setting the MIDI transmit channel. This parameter can be set to either “1 ch” (Channel 1) or
“off.
Factory default settings: 1 ch (Channel 1)
Display when set
On the reface DX, channels 2 to 16 can also be selected on the MIDI Settings screen, which is dis-
played by using the [FUNCTION] button. For details, refer to “Functions of Front Panel Compo-
nents” for the reface DX (page 16).
CS
ON: The lamps from the LOOPER section light up.
off: The lamps from the LOOPER section flash.
DX “Local control ON” or “Local control off” is displayed on-screen.
CP
ON: The [TYPE] knob’s Clv lamp and the lamps from the TREMOLO/WAH to D.DELAY/
A.DELAY sections light up.
off: The [TYPE] knobs Clv lamp and the lamps from the TREMOLO/WAH to D.DELAY/
A.DELAY sections flash.
YC
ON: The ROTARY SPEED lamps light up.
off: The ROTARY SPEED lamps flash.
DX “Sustain FC3” or “Sustain FC4/5” is displayed on-screen.
CP
FC3: The [TYPE] knob’s Clv lamp and the lamps from the TREMOLO/WAH to D.DELAY/
A.DELAY sections light up.
FC4/5: The [TYPE] knobs Clv lamp and the lamps from the TREMOLO/WAH to D.DELAY/
A.DELAY sections flash.
CS
1 ch: The lamps from the LOOPER section light up.
off: The lamps from the LOOPER section flash.
DX “MIDI transmit ch 1” or “MIDI transmit ch off” is displayed on-screen.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha reface YC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha reface YC in the language / languages: English as an attachment in your email.

The manual is 3,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha reface YC

Yamaha reface YC User Manual - German - 56 pages

Yamaha reface YC User Manual - Dutch - 56 pages

Yamaha reface YC User Manual - French - 56 pages

Yamaha reface YC User Manual - Italian - 56 pages

Yamaha reface YC User Manual - Portuguese - 56 pages

Yamaha reface YC User Manual - Spanish - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info