588952
25
Zoom out
Zoom in
Previous page
1/60
Next page
19
reface CS/DX/CP/YC Owner’s Manual
Functions of Front Panel Components
DX
y-1. [FREQ] (frequency) button
For displaying the Operator Frequency Set-
tings screen. If you flick at a certain speed or
greater, the setting will change to the closest
integer value. For example, if the current set-
ting is 9.29 and you flick quickly upward, the
value will change to 10.00.
Frequencies can be specified as either a ratio
or a fixed frequency. Refer to the “Reference
Manual” (a digital manual) for details on the
setting procedure.
y-2. [ALGO] (Algorithm) button
For displaying the Algorithm Setting screen.
On this screen, you can specify how the four
operators should be combined. A total of 12
algorithms are available.
y-3. [LEVEL] button
For displaying the Operator Level Settings
screen. On this screen, you can adjust the vol-
ume (for carriers) or the degree to which the
corresponding carrier is modulated (for mod-
ulators).
y-4. [FB] (Feedback) button
For displaying the Feedback Settings screen.
Waveforms can be changed by feeding some
of the signal generated by an operator back
through that operator.
The reface DX allows you to set feedback
levels for each of the operators. If, for exam-
ple, you were to select Algorithm No. 8 and
apply feedback to all of the operators, the sig-
nal flow would be as follows.
If you move the slider up from the center
position, the feedback type becomes saw-
tooth ( ) and the feedback level will
increase. As a result, the waveform morphs
from a sine to a sawtooth shape, and at the
maximum level, it is transformed fully into a
sawtooth wave. If you move the slider down
from the center position, the feedback type
becomes square ( ) and the feedback level
will increase. As a result, the waveform
morphs from a sine to a square shape, and at
the maximum level, it is transformed fully
into a square wave. At the center position, the
feedback level is “0.” Here, none of the signal
is fed back and a sine wave is produced.
NOTICE
Take special care when setting a low carrier
frequency in FIXED mode as this action can
damage the speakers.
Carrier (square) Modulators (circular)
Algorithm number Carrier (square)
2
1
4
3
Feedback level
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha reface YC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha reface YC in the language / languages: English as an attachment in your email.

The manual is 3,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha reface YC

Yamaha reface YC User Manual - German - 56 pages

Yamaha reface YC User Manual - Dutch - 56 pages

Yamaha reface YC User Manual - French - 56 pages

Yamaha reface YC User Manual - Italian - 56 pages

Yamaha reface YC User Manual - Portuguese - 56 pages

Yamaha reface YC User Manual - Spanish - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info