588952
22
Zoom out
Zoom in
Previous page
1/60
Next page
16
reface CS/DX/CP/YC Owner’s Manual
Functions of Front Panel Components
qBuilt-in speakers
For outputting the instrument’s sounds. If
you do not want sound to be output from
these speakers, turn the instrument on (page
8) while holding down the D2 key on the key-
board. See page 41 for details.
No sound will be output from the built-in
speakers when headphones are connected.
You can also press the [FUNCTION] button to
call up the System Settings screen and change
the Speaker Output setting.
w[PITCH BEND] lever
For smoothly varying the pitch of the instru-
ment. The pitch rises when you move the
lever up; it drops when you move the lever
down. Pitch bend can be set for individual
Voices.
By switching the direction in which note
pitches are changed by the [PITCH BEND]
lever, you can produce guitar-like note bend-
ing effects when playing the reface DX as a
keytar. Inverting the pitch bend range makes
the pitch rise when you move the lever down
and drop when you move the lever up.
On the reface DX, pitch bend settings can be
changed by using the [FUNCTION] button.
e[VOLUME] slider
For adjusting the instrument’s overall vol-
ume. When you move the slider up, the sound
output from the built-in speakers, the OUT-
PUT [R]/[L/MONO] jacks, and the
[PHONES] jack will become louder.
r[OCTAVE] slider
For moving the range of notes covered by the
keyboard in units of 1 octave. For example,
when set to “+,” the note C4 will be produced
when you play C3 on the keyboard (see the
illustration above). The available settings are
“++” (2 octaves up), “+” (1 octave up), “0”
(no change in pitch), “-” (1 octave down),
and “--” (2 octaves down).
tDATA ENTRY section
t-1. Touch-type sliders or switches
By flicking, tapping, or tapping and holding
these four touch-sensitive areas, which oper-
ate as sliders or switches, you can adjust val-
ues and change settings. The screen on the
right shows the parameters that can be set.
Thanks to multi-touch support, meanwhile,
you can simultaneously control up to four
sliders
q
t
-1
t
-2
wer
t
C3C2
reface DX
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha reface YC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha reface YC in the language / languages: English as an attachment in your email.

The manual is 3,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha reface YC

Yamaha reface YC User Manual - German - 56 pages

Yamaha reface YC User Manual - Dutch - 56 pages

Yamaha reface YC User Manual - French - 56 pages

Yamaha reface YC User Manual - Italian - 56 pages

Yamaha reface YC User Manual - Portuguese - 56 pages

Yamaha reface YC User Manual - Spanish - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info