588950
48
Zoom out
Zoom in
Previous page
1/60
Next page
42
reface CS/DX/CP/YC Owner’s Manual
Appendix
Factory Reset
For returning all settings, including keyboard settings, to their factory defaults. On the reface CS and
the reface DX, loop phrases are also restored to the factory default condition.
For details, refer to “Restoring the Factory Default Settings (Factory Reset)” (page 40).
Display when carried out
Speaker Output
For setting whether or not to output the instrument’s sound from its built-in speakers. The speakers
will not produce any sound when this parameter is set to “off.
Factory default setting: ON
Display when set
MIDI Control
For turning on and off the transmission and receipt of MIDI Control Change messages specifically for
the reface. When you operate the instrument with this parameter turned on, MIDI messages for your
specific model will be transmitted. No messages are transmitted when you change the volume or
octave. On the reface DX, a MIDI Control Change message is transmitted when a setting is changed in
the FM section ([FREQ], [LEVEL], [ALGO], and [FB] buttons) but not when any other settings are
changed. For more information about the correspondence between controllers, control change num-
bers, and values, refer to the MIDI Reference (a digital manual).
Factory default setting: off
Display when set
CS The OSC [TYPE] lamps flash.
DX “Factory reset” is displayed on-screen.
CP The TYPE lamps flash.
YC The WAVE lamps flash.
CS
ON: The lamps from the LOOPER section light up.
off: The lamps from the LOOPER section flash.
DX “speakers ON” or “speakers off is displayed on-screen.
CP
ON: The [TYPE] knob’s Clv lamp and the lamps from the TREMOLO/WAH to D.DELAY/
A.DELAY sections light up.
off: The [TYPE] knobs Clv lamp and the lamps from the TREMOLO/WAH to D.DELAY/
A.DELAY sections flash.
YC
ON: The ROTARY SPEED lamps light up.
off: The ROTARY SPEED lamps flash.
CS
ON: The lamps from the LOOPER section light up.
off: The lamps from the LOOPER section flash.
DX “MIDI control ON” or “MIDI control off” is displayed on-screen.
CP
ON: The [TYPE] knob’s Clv lamp and the lamps from the TREMOLO/WAH to D.DELAY/
A.DELAY sections light up.
off: The [TYPE] knobs Clv lamp and the lamps from the TREMOLO/WAH to D.DELAY/
A.DELAY sections flash.
YC
ON: The ROTARY SPEED lamps light up.
off: The ROTARY SPEED lamps flash.
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha reface CS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha reface CS in the language / languages: English as an attachment in your email.

The manual is 3,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha reface CS

Yamaha reface CS User Manual - German - 56 pages

Yamaha reface CS User Manual - Dutch - 56 pages

Yamaha reface CS User Manual - French - 56 pages

Yamaha reface CS User Manual - Italian - 56 pages

Yamaha reface CS User Manual - Portuguese - 56 pages

Yamaha reface CS User Manual - Spanish - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info