635604
113
Zoom out
Zoom in
Previous page
1/120
Next page
113
NOTE:
*1 By default (factory settings) the DJX ordinarily functions as a 16-channel
multi-timbral tone generator, and incoming data does not affect the panel
voices or panel settings. However, the MIDI messages listed below do affect
the panel voices, pattern, and songs.
MIDI Master Tuning
System exclusive messages for changing the Reverb Type, Chorus Type,
and DSP Type.
The Remote Channel can be designated by using Function parameter #81.
The messages received over the set channel are handled in the same way as
key data received from the DJX itself. The following messages can be
received over the designated channel set in this Function parameter; all other
messages will be ignored.
Note ON
Note OFF
Control change : Bank select MSB, LSB (Main Voice Only), Modulation,
Volume, Expression, Sustain, All sound off, All note off
Program Change (Main Voice Only)
Pitch Bend
*2 Messages for these control change numbers cannot be transmitted from the
DJX itself. However, they may be transmitted when playing the pattern or
using the Arpeggiator.
*3 Exclusive
<GM System ON> F0H, 7EH, 7FH, 09H, 01H, F7H
This message automatically restores all default settings for the instrument,
with the exception of MIDI Master Tuning.
<MIDI Master Volume> F0H, 7FH, 7FH, 04H, 01H, llH, mmH, F7H
This message allows the volume of all channels to be changed simulta-
neously (Universal System Exclusive).
The values of “mm” is used for MIDI Master Tuning. (Values for “ll” are
ignored.)
<MIDI Master Tuning>
F0H, 43H, 1nH, 27H, 30H, 00H, 00H, mmH, llH, ccH, F7H
This message simultaneously changes the tuning value of all channels.
The values of “mm” and “ll” are used for MIDI Master Tuning.
The default value of “mm” and “ll” are 08H and 00H, respectively. Any
values can be used for “n” and “cc.”
MIDI IMPLEMENTATION CHART
<Bulk Dump>
This is used for saving (recording) User data (User songs, User Perfor-
mance Setup, and Sampling data).
<Internal Clock, External Clock> (Receive Only)
F0H, 43H, 73H, 01H, 02H, F7H (Internal Clock)
F0H, 43H, 73H, 01H, 03H, F7H (External Clock)
These messages control the clock setting for the pattern.
<Reverb Type> F0H, 43H, 1nH, 4CH, 02H, 01H, 00H, mmH, llH, F7H
mm : Reverb Type MSB
ll : Reverb Type LSB
Refer to the Effect Map (page 114) for details.
<Chorus Type> F0H, 43H, 1nH, 4CH, 02H, 01H, 20H, mmH, llH, F7H
mm : Chorus Type MSB
ll : Chorus Type LSB
Refer to the Effect Map (page 114) for details.
<DSP Type> F0H, 43H, 1nH, 4CH, 02H, 01H, 40H, mmH, llH, F7H
mm : DSP Type MSB
ll : DSP Type LSB
Refer to the Effect Map (page 114) for details.
<DRY Level> F0H, 43H, 1nH, 4CH, 08H, 0mH, 11H, llH, F7H
ll : Dry Level
0m : Channel Number
*4 It is possible to switch between External and Internal Clock.
*5 When the pattern is started, an FAH message is transmitted. When pattern
is stopped, an FCH message is transmitted. When the clock is set to
External, both FAH (pattern start) and FCH (pattern stop) are recognized.
No MIDI messages can be received or transmitted in the Song mode.
113


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha PSRD1-DJX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha PSRD1-DJX in the language / languages: English as an attachment in your email.

The manual is 6,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info