635595
145
Zoom out
Zoom in
Previous page
1/178
Next page
143
About Digital Effects (Reverb/Chorus/DSP)
There are three types of digital effects installed in the PSR-630: the reverb effect (system
effect), the chorus effect (system effect) and the DSP effect (can be set as either as a system effect
or insertion effect).
In the PSR-730, the Multi Effect (EFFECT 1/2: insertion) is added to the three PSR-630
effects, for a total of five effects.
There are basically two ways to use the effects: with the DSP effect set as a system effect or
as a insertion effect. Each different way will be explained here.
Although not all the effect settings cannot be made by operating the PSR-730/630 panel
manually, some of them may be accessible through MIDI.
When DSP type Is Selected as a System Effect
Effect 2 part
Effect 2 is valid for
only one part.
Effect 1 part
Effect 1 is valid for
only one part.
Effect 2
on/off
Effect 2
on/off
Effect 2
on/off
Effect 2
on/off
Effect 1
on/off
Effect 1
on/off
Effect 1
on/off
Effect 1
on/off
DSP
(VARIATION)
REVERB
send chorus to reverb
send variation to chorus
send variation to reverb
DRY LINE
PAN
PAN
PAN
reverb
pan
reverb
return
OUT
The bold lines are stereo lines.
EQ
CHORUS
chorus
pan
chorus
return
variation
pan
DSP
return
dry level
DSP send
rev send
cho send
dry level
DSP send
rev send
cho send
dry level
DSP send
rev send
cho send
dry level
DSP send
rev send
cho send
EFF1
EFF1
EFF1
EFF1
EFF2
EFF2
EFF2
EFF2
Dry/Wet
Dry/Wet
Dry/Wet
Dry/Wet
Dry/Wet
Dry/Wet
Dry/Wet
Dry/Wet
Digital
Equalizer
(PSR-730)
Multi Effect
(PSR-730)
L Voice
All tracks that can
be revoiced.
R1 Voice
R2 Voice
MIDI
Channel 1
Channel 16
• The three PSR-630 effects or the five PSR-730 effects will be connected as shown below.
• Since the PSR-730 Multi Effect (EFFECT 1/2) is an insertion effect, it will be applied to only one part from
among the R1/R2/L parts.
The signal will enter reverb/chorus/DSP according to the send level (Depth) set for each, and the signal with
the effect applied will be output according to the return level that is set. The reverb/chorus/DSP send levels
(Depth) are set for each part (track) with the Revoice mode. The reverb/chorus/DSP return levels value are
set in common for all the parts.
• The stereo panning is available for each of the reverb, chorus and DSP at the output for their signals. Using
MIDI, the panning position for the effect can be set (page 158).
If a “Send Chorus to Reverb” (page 158) signal is transmitted to the PSR-730/630 from an external MIDI
device, a signal can be sent from the chorus to the reverb (connected in series). Also, if a “Send Variation
(DSP) to Reverb” (page 159) signal is transmitted, a signal can be sent from the DSP to the reverb and in the
same way if a “Send Variation (DSP) to Chorus” signal (page 159) is transmitted a signal can be sent from
DSP to the chorus. If these signals are used, the three effects can be connected in series, or used separately,
and a lot of different effects can be produced.
145


Need help? Post your question in this forum.

Forumrules
1

Forum

yamaha-psr-730

Reset search

  • what cables are needed to connect psr 730 to 2infinity sm112 speakers Submitted on 26-9-2020 at 21:57

    Reply Report abuse
  • How do you reverse the polarity on the sustain pedal ? Submitted on 23-7-2020 at 13:51

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha PSR-730 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha PSR-730 in the language / languages: English as an attachment in your email.

The manual is 8,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info