745448
38
Zoom out
Zoom in
Previous page
1/56
Next page
37
LEFT HOLD will not function during Multi Pad playback or Sequencer
ACCOMP. track playback even if the LEFT HOLD indicator is lit.
The PITCH BEND/GLISSANDO wheel to the left of the keyboard lets
you bend the pitch of notes or “glissando” notes played on the keyboard up
or down. Normal pitch is restored when the PITCH BEND/GLISSANDO
wheel is released. The maximum pitch bend/glissando range is preset for
each voice, but can be set as required for custom voices by using the CUS-
TOM VOICE EDIT feature described on page 27 of the Advanced Features
manual.
Pitch bend can be applied o the ORCH. 1 voice only, the ORCH. 2 voice only,
or both voices via the PITCH BEND ASSIGN function described on page 39 of
the Advanced Features manual. Also, pitch bend is applied to harmony notes
on the basis of the ORCH. 1 settings.
The pitch bend wheel may have no effect when applied to notes at the upper
and lower extremes of the keyboard if a CUSTOM VOICE is used. Also, sudden
pitch changes may occur.
Pitch bend can be applied to notes from C-1 to C7 (i.e. MIDI note numbers 12
through 108). Pitch can not be bent down below the lowest note or up above the
highest note in this range.
The MODULATION/EFFECT wheel to the left of the keyboard lets you
apply effects or amplitude/pitch modulation to notes played on the key-
board. Rolling the MODULATION/EFFECT wheel upward (away from
you) increases the effect or modulation depth. Use the WHEEL SELECT
function described on page 39 of the Advanced Features manual to select
effect or modulation operation. The type of effect applied when effect op-
eration is selected is determined by the EFFECT TYPE function described
on page 36 of the Advanced Features manual.
The modulation effect mode is preset for each voice, but can be set for
custom voices by using the CUSTOM VOICE EDIT feature described on
page 27 of the Advanced Features manual.
Modulation is automatically applied to some voices, while to some it cannot be
applied even if the modulation wheel is operated.
Press the [REVERB] button to apply the reverb effect specified by the
REVERB TYPE function described on page 35 of the Advanced features
manual to the ORCH. 1 and 2 voices as well as the chord and rhythm ac-
companiment sound. The [REVERB] button alternately turns the reverb
effect on (indicator lit) or off (indicator out).
Press the EFFECT button to apply the effect specified by the EFFECT
TYPE function described on page 36 of the Advanced features manual to
the ORCH. 1 and 2 voices as well as the chord accompaniment sound. The
[EFFECT] button alternately turns the effect on (indicator lit) or off (indica-
tor out).
DETAIL
HINT
DETAIL
DETAIL
Pitch Bend/Glissando
Wheel
DOWN
UP
PITCH BEND/
GLISSANDO
MAX
MIN
MODULATION/
EFFECT
Modulation/Effect Wheel
DOWN
UP
PITCH BEND/
GLISSANDO
MAX
MIN
MODULATION/
EFFECT
DETAIL
Reverb
REVERB
EFFECT
Effects
REVERB
EFFECT
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha psr-5700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha psr-5700 in the language / languages: English as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info