635592
121
Zoom out
Zoom in
Previous page
1/160
Next page
121
119
Footswitch
Various functions can be assigned to the footswitch connected to the FOOT SWITCH
jack. The polarity of the footswitch can also be changed.
Select the Functions to be controlled by the footswitch.
Set the polarity of the footswitch NORMAL or REVERSE.
Functions controlled by the footswitch
Sustain When you press the foot switch,
sustain is applied to the keyboard
notes.
Sostenuto When you press the foot switch,
the sostenuto effect is applied to
the keyboard notes.
Soft When you press the foot switch, the soft effect is applied to the keyboard notes.
Regist + When you press the foot switch, a register with one number higher is recalled.
For example, if you step on the foot switch with bank 1-3 recalled, 1-4 will be
recalled, then next 2-1 will be recalled.
Regist - When you press the foot switch, a register with one number lower is recalled. For
example, if you step on the foot switch with bank 3-2 recalled, 3-1 will be
recalled, then next 2-4 will be recalled.
Start/Stop Pressing the footswitch has the same effect as pressing the START/STOP button
on the panel.
Synchro Stop Pressing the footswitch has the same effect as pressing the SYNC STOP button
on the panel.
Bass Hold The bass root note will be held as long as you press the footswitch.
Break When you press the foot switch, accompaniment will stop. Releasing the switch
with the foot will cause it to play again from the next measure.
Tap Tempo Pressing the footswitch has the same effect as pressing the TAP TEMPO button
on the panel.
Polarity
This parameter lets you configure the foot switch response of the PSR-540 to
match that of the particular foot switch you are using. If the foot switch works in
the opposite way (i.e., pressing the foot switch has no effect, but releasing it
does), try changing this setting. The default setting is “Norm.
Other Functions (Utility)
For “Sostenuto, if you press and hold the foot switch
here, only the first note will be sustained (the note that
you played and held when pressing the foot switch).
For “Sustain, if you press and hold the foot switch here,
all the notes shown will be sustained.
Type=Sustain
Use the data dial, the [+/YES]
button or the [-/NO] button.
Polarity =Norm
Use the data dial, the [+/YES]
button or the [-/NO] button.
Press the [NEXT] button.
When using the “Regist +” or
“Regist -” functions with the
fooswitch, make sure to
make the appropriate setting
(“Regist +” or “Regist -”) to all
of the Registrations you
intend to use with the
footswitch.
121


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha PSR-540PC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha PSR-540PC in the language / languages: English as an attachment in your email.

The manual is 3,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info