635592
88
Zoom out
Zoom in
Previous page
1/160
Next page
88
002 UserSong1
RecMode=Edit
Ed Menu=Setup Dt
86
Editing Setup Data
This function lets you make changes to various voice-related parameters (setup data)
for each track of a recorded song. The following parameters can be edited:
Voice ................................. Assigns a voice number to the specified track.
Volume .............................. Sets the volume of the specified track.
Octave............................... Shifts the pitch of the specified track up or down by
one or two octaves. A setting of “0” produces normal
pitch.
Pan.................................... Positions the sound of the specified track from left to
right in the stereo sound field. A setting of “-7” is full
left, “7” is full right, “0” is center, and all other settings
are corresponding positions in between.
Reverb depth..................... Sets the reverb depth for the specified track, and thus
the amount of reverb effect applied to that voice or
track.
Chorus depth .................... Sets the chorus depth for the specified track, and thus
the amount of chorus effect applied to that voice or
track.
DSP depth......................... Sets the DSP depth for the specified track, and thus
the amount of DSP effect applied to that voice or track.
Only one of the Setup
parameters can be recorded
to each track, and any
parameter changes made in
the middle of the song will be
cancelled. However, in the
case of Volume data, any
Volume changes in the
middle of the song are
applied as an offset to the
initial Setup Data setting.
1
-
4
Use the same operation as in “Re-recording” (page 84).
5
Select the file (song) for which you wish to change the setup
data.
Use the data dial, the [+/YES] button or the [-/NO] button.
6
Press the [NEXT] button again to display the RecMode
screen.
7
Select “Edit”.
Use the data dial, the [+/YES] button or the [-/NO] button .
8
Press the [NEXT] button to display the Edit Menu screen.
9
Select “Setup Dt”.
Use the data dial, the [+/YES] button or the [-/NO] button.
10
Press the [NEXT] button to display the setup data screen.
Song Recording
88


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha PSR-540PC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha PSR-540PC in the language / languages: English as an attachment in your email.

The manual is 3,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info