635592
75
Zoom out
Zoom in
Previous page
1/160
Next page
75
73
Voice R1, R2, L
When one of the DSP types belonging to the Insertion Effect (page
50) is selected, the effect will be exclusively applied to the Voice R1
and not to the Voice R2/L. Therefore the DSP depth for the Voice R2/
L cannot be changed. Also, the DSP depth for the Voice R1 cannot be
altered depending on the selected Insertion Effect type.
Save any part settings you want to keep to the PSR-540 Registration
Memory (page 54). The voice part settings are temporary and will be
lost if the power is turned off, a different R1 panel voice is selected
while the Voice Set function (page 120) is on, or a Registration
Memory is recalled.
Song
Make sure to first select the appropriate song for which you wish to
set the part before calling up the relevant display.
Any part settings made for the song will be lost if you turn off the
power, select another song, or select the Style mode (after finishing
the part settings). To prevent this, make sure to select the Recording
mode and save the song data to disk (page 78).
Auto Accompaniment
Only drum kit voices (page 31) can be selected for the RHYTHM
MAIN track.
When using auto accompaniment part settings for the RHYTHM SUB
track, any of the voices can be selected but no chord changes will
occur when using Auto Accompaniment.
Make sure to first select the appropriate style for which you wish to
set the part before calling up the relevant display.
Auto accompaniment part settings can even be set while an
accompaniment is playing.
Auto accompaniment part settings affects all sections of the selected
style.
Save any part settings you want to keep to the PSR-540 Registration
Memory (page 54). The Auto accompaniment part setting are
temporary and will be lost if the power is turned off, a different style is
selected while the Voice Set function (page 120) is on, or a
Registration Memory is recalled.
Voice Change
In addition to being able to change the voices played from the keyboard (R1, R2, L),
you can also change the voices for each track of the auto accompaniment and songs.
1
Press the [VOICE CHANGE] button.
The [VOICE CHANGE] lamp lights.
2
Select the part for which you want to change voices.
Parts can be selected from the following buttons (depending on the selected
mode: Style or Song):
Voice ................................. PART ON/OFF [VOICE R1], [VOICE R2], [VOICE L]
buttons
Accompaniment track ....... [TRACK9]-[TRACK16] buttons (Style mode)
Song track ......................... [TRACK1]-[TRACK16] button (Song mode)
3
Select a voice.
Use the data dial, the [+/YES] button, the [-/NO] button or the number buttons
[1]-[0].
Refer to the Voice List (page 123).
4
Repeat steps #2 and #3 as often as needed for other parts/
tracks.
5
Press the [EXIT] button to exit from the Voice Change screen.
Part Settings
RhM=216 StndKit1
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha PSR-540PC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha PSR-540PC in the language / languages: English as an attachment in your email.

The manual is 3,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info