460057
11
Zoom out
Zoom in
Previous page
1/94
Next page
Setting Up
DGX-205/203, PSR-295/293 Owner’s Manual 11
Make all necessary connections BEFORE turning the power on.
The DGX-205/203, PSR-295/293 speakers are automat-
ically shut off when a plug is inserted into this jack.
The PHONES/OUTPUT jack also functions as an exter-
nal output.
You can connect the PHONES/OUTPUT jack to a key-
board amplifier, stereo system, mixer, tape recorder, or
other line-level audio device to send the instrument’s
output signal to that device.
The sustain function lets you produce a natural sustain
as you play by pressing an optional footswitch. Plug the
Yamaha FC4 or FC5 footswitch into this jack and use it
to switch sustain on and off.
Connect the instrument’s USB terminal to the USB ter-
minal of a computer, and you can transfer performance
data and song files between the two (page 66).
To use the USB data-transfer features you’ll need to do
the following:
• Connect the USB terminal of the computer to the
USB terminal on the instrument using a standard
USB cable.
• Install the USB MIDI driver on your computer.
Installation of the USB MIDI driver is described on
page 71.
With this capability you can, for example, use the
Musicsoft Downloader software provided on the sup-
plied CD-ROM to transfer songs from your computer to
the instrument’s flash memory.
Turn down the volume by turning the [MASTER VOL-
UME] control to the left and press the [STANDBY/ON]
switch to turn on the power. Pressing the switch again
turns the power off.
Backup data in the flash memory (page 42) is loaded to
the instrument when the power is turned on. If no
backup data exists on flash memory, all instrument set-
tings are restored to the initial factory defaults when the
power is turned on.
Connecting headphones (PHONES/OUTPUT jack)
Connecting a footswitch (SUSTAIN JACK)
•Avoid listening with the headphones at high volume for long peri-
ods of time; doing so may not only result in ear fatigue, it may be
damaging to your hearing.
WARNING
•To prevent damage to the speakers, set the volume of the external
devices at the minimum setting before connecting them. Failure to
observe these cautions may result in electric shock or equipment
damage. Also, be sure to set the volumes of all devices at their
minimum levels and gradually raise the volume controls while
playing the instrument to set the desired listening level.
CAUTION
Make sure that the footswitch plug is properly connected to the SUS-
TAIN jack before turning on the power.
Do not press the footswitch while turning the power on. Doing this
changes the recognized polarity of the footswitch, resulting in reversed
footswitch operation.
NOTE
Connecting to a computer (USB terminal)
Turn on the power
Make sure to purchase a quality USB cable at a musical instrument
store, computer store or electrical appliance store.
NOTE
Even when the switch is in the “STANDBY” position, a small
amount of electricity is still being consumed by the instrument.
When you are not using the instrument for a long time, make sure
you unplug the AC power adaptor from the wall AC outlet, and/or
remove the batteries from the instrument.
CAUTION
•Never attempt to turn the power off when a “WRITING!” message
is shown in the display. Doing so can damage the flash memory
and result in a loss of data.
CAUTION
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha PSR 293 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha PSR 293 in the language / languages: English as an attachment in your email.

The manual is 3,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha PSR 293

Yamaha PSR 293 User Manual - German - 98 pages

Yamaha PSR 293 User Manual - Dutch - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info