635412
75
Zoom out
Zoom in
Previous page
1/98
Next page
Function
75
Function parameters
CATEGORY SELECT Display Range/
Settings
Description
Overall Transpose Transpos -12–12 This determines the transposition of the entire PSR-290 sound. *
Tuning Tuning -100–100 This determines the pitch of the entire PSR-290 sound . *
Split Point SplitPnt 000–127 This determines the highest key for the Split voice and sets the Split
“point” — in other words, the key that separates the Split (lower) and Main
(upper) voices. (The Split voice sounds up to and including the Split Point
key.) The default Split Point is 054 (F#2). The Split Point setting and Ac-
companiment Split Point setting are automatically set to the same value.
*
Touch
Sensitivity
TouchSns 1–3 A setting of “1” results in limited touch response; this setting produces a
relatively narrow dynamic range, no matter how lightly or strongly you
play the keys. “2” lets you play over a normal dynamic range (soft to loud),
while “3” is designed for playing very soft passages, giving you slightly
more detailed control in the soft volume range. When Touch is turned off
(page 30), a constant velocity value of 80 is produced (total velocity range
= 0–127).
*
Main Voice Volume M.Volume 0–127 This determines the volume of the Main voice, letting you create an opti-
mum mix with the Dual or Split voice.
*
Octave M.Octave -2–2
(octave)
This determines the octave range for the Main voice. Use this to set the
most suitable range for the Main voice.
*
Pan M.Pan
0 (full left)–64
(center) –127
(full right)
This determines the pan position of the Main voice in the stereo image. *
Reverb
Send
Level
M.RevLvl 0–127 This determines how much of the Main voice’s signal is sent to the Re-
verb effect. Higher values result in a louder Reverb effect.
*
Chorus
Send
Level
M.ChoLvl 0–127 This determines how much of the Main voice’s signal is sent to the Cho-
rus effect. Higher values result in a louder Chorus effect.
*
DSP Send
Level
M.DspLvl 0–127 This determines how much of the Main voice’s signal is sent to the DSP
effect. Higher values result in a louder DSP effect.
*
Dual Voice Voice D.Voice 1–605 This select the dual voice.
Volume D.Volume 0–127 This determines the volume of the Dual voice, letting you create an opti-
mum mix with the Main voice.
*
Octave D.Octave -2–2
(octave)
This determines the octave range for the Dual voice. Use this to create
an octave layer with the Main voice.
*
Pan D.Pan
0 (full left)–64
(center) –127
(full right)
This determines the pan position of the Dual voice in the stereo image.
For a spacious sounding effect, set this value at or near 0, and set the
Main Voice Pan at the opposite positive value.
*
Reverb
Send
Level
D.RevLvl 0–127 This determines how much of the Dual voice’s signal is sent to the Re-
verb effect. Higher values result in a louder Reverb effect for the Dual
voice.
*
Chorus
Send
Level
D.ChoLvl 0–127 This determines how much of the Dual voice’s signal is sent to the Cho-
rus effect. Higher values result in a louder Chorus effect for the Dual
voice.
*
DSP Send
Level
D.DspLvl 0–127 This determines how much of the Dual voice’s signal is sent to the DSP
effect. Higher values result in a louder DSP effect for the Dual voice.
*
Split Voice Voice S.Voice 1–605 This select the split voice.
Volume S.Volume 0–127 This determines the volume of the Split voice, letting you create an opti-
mum mix with the Main voice.
*
Octave S.Octave -2–2
(octave)
This determines the octave range for the Split voice. Use this to set the
most suitable range for the Split (lower) voice.
*
Pan S.Pan
0 (full left)–64
(center) –127
(full right)
This determines the pan position of the Split voice in the stereo image.
For a spacious sounding effect, set this value at or near 0, and set the
Main Voice Pan at the opposite positive value.
*
Reverb
Send
Level
S.RevLvl 0–127 This determines how much of the Split voice’s signal is sent to the Reverb
effect. Higher values result in a louder Reverb effect for the Split voice.
*
Chorus
Send
Level
S.ChoLvl 0–127 This determines how much of the Split voice’s signal is sent to the Chorus
effect. Higher values result in a louder Chorus effect for the Split voice.
*
DSP Send
Level
S.DspLvl 0–127 This determines how much of the Split voice’s signal is sent to the DSP
effect. Higher values result in a louder DSP effect for the Split voice.
*
* The “*” mark indicates that the setting can be restored to default value by pressing both [+]/[-] buttons simultaneously.
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha PSR-290 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha PSR-290 in the language / languages: English as an attachment in your email.

The manual is 5,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha PSR-290

Yamaha PSR-290 User Manual - German - 100 pages

Yamaha PSR-290 User Manual - Dutch - 84 pages

Yamaha PSR-290 User Manual - French - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info