635415
73
Zoom out
Zoom in
Previous page
1/78
Next page
73
NOTE:
*1 By default (factory settings) the PSR-275/273 ordinarily functions as a 16-
channel multi-timbral tone generator, and incoming data does not affect
the panel voices or panel settings. However, the MIDI messages listed
below do affect the panel voices, auto accompaniment, and songs.
MIDI Master Tuning
System exclusive messages for changing the Reverb Type and Cho-
rus Type.
*2 Messages for these control change numbers cannot be transmitted from
the PSR-275/273 itself. However, they may be transmitted when playing
the accompaniment, song or using the Harmony effect.
*3 Exclusive
<GM System ON> F0H, 7EH, 7FH, 09H, 01H, F7H
This message automatically restores all default settings for the instru-
ment, with the exception of MIDI Master Tuning.
<MIDI Master Volume> F0H, 7FH, 7FH, 04H, 01H, ll, mm, F7H
This message allows the volume of all channels to be changed simul-
taneously (Universal System Exclusive).
The values of “mm” is used for MIDI Master Tuning. (Values for “ll” are
ignored.)
<MIDI Master Tuning> F0H, 43H, 1nH, 27H, 30H, 00H, 00H, mm, ll, cc,
F7H
This message simultaneously changes the tuning value of all chan-
nels.
The values of “mm” and “ll” are used for MIDI Master Tuning.
The default value of “mm” and “ll” are 08H and 00H, respectively. Any
values can be used for “n” and “cc.
<Reverb Type> F0H, 43H, 1nH, 4CH, 02H, 01H, 00H, mmH, llH, F7H
mm : Reverb Type MSB
ll : Reverb Type LSB
Refer to the Effect Map (page 75) for details.
<Chorus Type> F0H, 43H, 1nH, 4CH, 02H, 01H, 20H, mmH, llH, F7H
mm : Chorus Type MSB
ll : Chorus Type LSB
Refer to the Effect Map (page 75) for details.
*4 When the accompaniment is started, an FAH message is transmitted.
When accompaniment is stopped, an FCH message is transmitted.When
the clock is set to External, both FAH (accompaniment start) and FCH
(accompaniment stop) are recognized.
*5 Local ON/OFF
<Local ON> Bn, 7A, 7F
<Local OFF> Bn, 7A, 00
Value for “n” is ignored.
HINWEIS:
*1 Im Standardbetrieb (Werksvorgaben) funktioniert das PSR-275/273
gewöhnlich als multi-timbraler 16Kanal- Klanggenerator, und eingehende
Daten haben keinen Einfluß auf die Bedienfeld-Stimmen und die Bedien-
feld-Einstellungen. Die im folgenden aufgeführten Befehle verändern
jedoch dieBedienfeld-Stimmen, die automatische Begleitung und die
Songs:
MIDI Master Tuning
Systemexklusive Befehle zum Ändern von Reverb Type und Chorus
Type.
*2 Befehle für diese Steuerbefehlsnummern können vom PSR-275/273
selbst nicht gesendet werden. Sie können jedoch gesendet werden,
wenn die Begleitung oder Song gespielt oder der Harmonie-Effekt ver-
wendet wird.
*3 Exclusive
<GM System ON> (GM-System AN) F0H, 7EH, 7FH, 09H, 01H, F7H
Durch diesen Befehl werden automatisch alle Werksvorgaben des
Instruments, mit Ausnahme von MIDI Master Tuning, wieder herge-
stellt.
<MIDI Master Volume> (MIDI-Gesamtlautstärke)
F0H, 7FH, 7FH, 04H, 01H, ll, mm, F7H
Mit diesem Befehl kann die Lautstärke aller Kanäle gleichzeitig geän-
dert werden (Universal System Exclusive).
Die Werte für „mm“ werden für MIDI Master Tuning verwendet. (Werte
für „ll“ werden ignoriert.)
<MIDI Master Tuning> (MIDI-Grundstimmung)
F0H, 43H, 1nH, 27H, 30H, 00H, 00H, mm, ll, cc, F7H
Durch diesen Befehl wird der Stimmungswert für alle Kanäle gleich-
zeitig geändert.
Die Werte von „mm“ und „ll“ werden für MIDI Master Tuning verwen-
det.
Der Standardwert beträgt für „mm“ 08H und für „ll“ 00H. Fürr „n“ und
„cc“ können beliebige Werte verwendet werden.
<Reverb Type> (Reverb-Typ)
F0H, 43H, 1nH, 4CH, 02H, 01H, 00H, mmH, llH, F7H
mm : Reverb Type MSB
ll : Reverb Type LSB
Weitere Einzelheiten hierzu finden Sie in der Effekt-Zuordnung (Seite 75).
<Chorus Type> (Chorus-Typ)
F0H, 43H, 1nH, 4CH, 02H, 01H, 20H, mmH, llH, F7H
mm : Chorus Type MSB
ll : Chorus Type LSB
Weitere Einzelheiten hierzu finden Sie in der Effekt-Zuordnung (Seite 75).
*4 Beim Starten der Begleitung wird ein Befehl FAH gesendet. Beim
Stoppen der Begleitung wird ein Befehl FCH gesendet. Wurde für die
Taktsteuerung „External“ festgelegt, werden sowohl der Befehl FAH (Start
der Begleitung) als auch der Befehl FCH (Stopp der Begleitung) erkannt.
*5 Local ON/OFF
<Local ON> Bn, 7A, 7F
<Local OFF> Bn, 7A, 00
Der Wert für „n“ wird ignoriert.
Feuille d’implémentation MIDI / Gráfica de implementación MIDI
251
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha PSR-275 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha PSR-275 in the language / languages: German as an attachment in your email.

The manual is 4,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha PSR-275

Yamaha PSR-275 User Manual - English - 76 pages

Yamaha PSR-275 User Manual - Dutch - 75 pages

Yamaha PSR-275 User Manual - French - 78 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info