460053
8
Zoom out
Zoom in
Previous page
1/64
Next page
8
Setting Up
This section contains information about setting up your PSR-260 for playing. Make sure to
read this section carefully before using the instrument.
Power Requirements
Although the PSR-260 will run either from an optional AC adaptor or batteries,
Yamaha recommends use of an AC adaptor whenever possible. An AC adaptor is
more environmentally friendly than batteries and does not deplete resources.
Using an AC Power Adaptor • • • • • • • • • • • • • • • • • • • • • • • • •
To connect your PSR-260 to a wall socket, you will need the optionally available
Yamaha PA-3B Power Adaptor. Use of other AC adaptors could result in damage
to the instrument, so be sure to ask for the right kind. Connect one end of the
adaptor to the DC IN 10-12V jack on the rear panel of your PSR-260, and the
other end to a suitable electrical outlet.
Using Batteries • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Inserting Batteries
Turn the instrument upside-down and remove the battery compartment lid. Insert
six 1.5-volt size “D” (SUM-1, R-20 or equivalent) batteries as shown in the illus-
tration, making sure that the positive and negative terminals are properly aligned,
and replace the lid.
When the Batteries Run Down
When the batteries run low and the battery voltage drops below a certain level, the
PSR-260 may not sound or function properly. As soon as this happens, replace
them with a complete set of six new batteries.
Turning On the Power
With the AC power adaptor connected or with batteries installed, simply press the
STANDBY switch until it locks in the ON position. When the instrument is not in
use, be sure to turn the power off. (Press the switch again so that it pops up.)
Use ONLY a Yamaha PA-3B AC
Power Adaptor (or other adap-
tor specifically recommended
by Yamaha) to power your
instrument from the AC mains.
The use of other adaptors may
result in irreparable damage to
both the adaptor and the PSR-
260.
Unplug the AC Power Adaptor
when not using the PSR-260,
or during electrical storms.
BATTERIES 1.5V
x
6
Never mix old and new batter-
ies or different types of batter-
ies (e.g., alkaline and
manganese).
To prevent possible damage
from battery leakage, remove
the batteries from the instru-
ment if it is not to be used for a
long time.
Even when the switch is in the
“STANDBY” position, electric-
ity is still flowing to the instru-
ment at the minimum level.
When you are not using the
PSR-260 for a long time, make
sure you unplug the AC power
adaptor from the wall AC out-
let, and/or remove the batteries
from the instrument.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha PSR 260 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha PSR 260 in the language / languages: English as an attachment in your email.

The manual is 3,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha PSR 260

Yamaha PSR 260 User Manual - Dutch - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info