669113
77
Zoom out
Zoom in
Previous page
1/94
Next page
75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
Clock Mode
Reception of an external MIDI clock signal can be enabled or disabled as required. When disabled, all of the
time-based functions (Auto Accompaniment, SONG MEMORY, etc.) are controlled by the PSR-1700/PSR-
2700s own internal clock, the speed of which is set by the [TEMPO] button. When MIDI clock reception is
enabled, however, all timing is controlled by an external MIDI clock signal received via the MIDI IN terminal
(the [TEMPO] setting has no effect).
NOTES
• If clock reception is enabled but no MIDI clock signal is received for more than 400
milliseconds, external clock reception is automatically disable and normal internal
clock operation resumes.
• If you attempt to change the tempo setting when MIDI clock reception is enabled,
“Tempo
q
=External” will appear on the LCD display panel.
ZPress the [RECEIVE CH/CL/COM] Button & Select “Clock Rx” .........................................................
Press the [RECEIVE CH/CL/COM] button, then use the [+] and [–]
buttons, the number buttons, the data dial, or the [RECEIVE CH/CL/
COM] button itself to select Clock Rx on the LCD display panel (Clock
Rx is the next step above MIDI channel 16).
Use the [+/] button in the number-button row to select the desired clock
mode. The disable and enable modes are selected alternately each time the
[+/] button is pressed, and the selected mode appears on the right digit of
the LCD display panel (Clock Rx=0:Off for disable; Clock Rx:=1:On
for enable).
+
1
_ _
9
XSelect the Desired Mode ........................................................................................................................
XSelect the Desired Mode ........................................................................................................................
Use the [+/] button in the number-button row to select the desired start
mode. The start/stop modes are selected in sequence each time the [+/]
button is pressed: Cmnd Rx=0:Off, Cmnd Rx=1:Accomp, or Cmnd
Rx=2:Song.
ZPress the [RECEIVE CH/CL/COM] Button & Select “Cmnd Rx”.........................................................
Press the [RECEIVE CH/CL/COM] button, then use the [+] and [–]
buttons, the number buttons, the data dial, or the [RECEIVE CH/CL/
COM] button itself to select Cmnd Rx on the LCD display panel (Cmnd
Rx is the next step above Clock Rx or the next step
below MIDI
channel 1).
+
1
_ _
9
Start/Stop Mode
This function determines the effect of external MIDI start and stop signals. There are three start/stop modes,
as follows:
Mode “0” Start/stop reception disabled.
Mode “1” MIDI start and stop commands start and stop the PSR-1700/PSR-2700 Auto Accompani-
ment feature.
Mode “2” MIDI start and stop commands start and stop the PSR-1700/PSR-2700 SONG MEMORY
feature.
RECEIVE
CH/CL/COM
MODE
................
0 RX OFF
1 MULTI
2 REMOTE
3 CHORD
4 ROOT
RECEIVE
CH/CL/COM
MODE
................
0 RX OFF
1 MULTI
2 REMOTE
3 CHORD
4 ROOT
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha PSR-1700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha PSR-1700 in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info