669113
59
Zoom out
Zoom in
Previous page
1/94
Next page
57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
Formatting a New Floppy Disk
The PSR-1700 and PSR-2700 use only 3.5" 2DD floppy disks. Before you can use a new disk for saving
data, the disk must be “formatted” as described below.
ZInsert the Disk To Be Formatted ...........................................................................................................
NOTES
• If an unformatted disk is already in the drive and the format operation
was cancelled prior to execution, press the [FORMAT] button to re-
engage the format function.
• The [FORMAT] button can also be used when you want to re-format a
formatted disk - to erase all the data it contains, for example.
• “Unformatted Disk” will appear on the display if an unformatted write-
protected disk is loaded. Make sure the disk’s write protect tab is in
the write position before formatting.
XConfirm and Format ...............................................................................................................................
Press the [YES] button to confirm and execute the format operation (or
press [NO] to cancel). Formatting an entire disk takes a few seconds, and
the progress of the operation is shown on the LCD display panel in percent
formatted: “0%” through “100%”. When the disk has been 100% formatted
the format function will be automatically disengaged.
Insert a new blank disk. Make sure that the disk’s write protect tab is set
to the “write” position (tab closed), and insert the new disk into the disk
drive unit with the sliding door facing the drive slot and the label side of the
disk facing upward. The disk should click securely into place.
When an unformatted disk is properly loaded, “Format?” will appear on
the LCD display panel, the ARE YOU SURE? indicator will flash and the
PSR-1700/PSR-2700 will ask “Are you sure?”.
PSR-2700PSR-1700
Format?
08:Showtune 001:GrandPno
AccOff Format?
DELETE FORMAT
PSR-2700PSR-1700
Formatting: 75%
08:Showtune 001:GrandPno
AccOff Formatting: 75%
NOTES
Be careful not to format a disk that already contains data you
want to keep. The format operation erases all data on the floppy
disk!
• The “Format?” display will also appear if you insert a disk that has
been formatted on a piece of equipment other than the PSR-1700 or
PSR-2700.
ARE YOU SURE ?
YES NO
CAUTION
Never remove the disk or turn the power off while the “Format-
ting” display is showing.
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha PSR-1700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha PSR-1700 in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info