371356
73
Zoom out
Zoom in
Previous page
1/626
Next page
Appendix
67 En
English
Appendix
If you experience any issues while using the DRX-730, look them up in the following tables and try the suggested
solution. If an issue is not listed, or you cannot resolve it yourself, contact your Yamaha dealer.
Troubleshooting
General
Issue Possible cause Solution
The DRX-730 turns off as soon
as it’s turned on.
The power cable may not be
connected properly.
Make sure the power cable is
connected to the AC wall outlet
properly.
A speaker cable may be shorting. Make sure the speaker cables are
connected properly (see page 9).
The DRX-730 may have been
subjected to a strong electrical
shock, such as lightning or
excessive static electricity.
Set the DRX-730 to standby, and
then disconnect the power cable.
Wait 30 seconds, reconnect the
power cable, and turn it back on
again.
The speakers produce no
sound.
The volume is set to minimum. Increase the volume (see page 17).
The sound is muted. Unmute the sound (see page 17).
The wrong input source is selected. Select the correct input source (see
page 16).
The speaker cables are connected
incorrectly.
Check the speaker cable
connections (see page 9).
The loaded disc is not supported. Use only supported disc formats
(see page 61).
Theres no TV picture. The TV cables are connected
incorrectly.
Check the TV cable connections
(see page 12).
If the COMPONENT VIDEO OUT
and HDMI connections are used
simultaneously, the COMPONENT
VIDEO OUT jacks may output
progressive video regardless of the
Component Out setting.
Disconnect the HDMI component,
or connect a TV that supports
progressive video to the
COMPONENT VIDEO OUT jacks
(see page 12).
The TV picture is not displayed
correctly.
The Video Output settings are
incorrect.
Check the Video Output settings
and correct as necessary (see
page 57).
The Component Out setting is set
to Progressive, but the TV
connected to the COMPONENT
VIDEO OUT does not support
progressive scanning.
Change the Component Out
setting to Interlace (see page 57).
The AV Connector Out setting is
set to RGB, but the TV connected
to the AV MONITOR OUT jack
does not support RGB.
Change the AV Connector Out
setting to Video (see page 57).
The TV connected to the HDMI
jack does not support the selected
resolution.
Change the HDMI Resolution
setting to a resolution supported by
the HDMI TV (see page 57).
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha pianocraft e730 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha pianocraft e730 in the language / languages: English as an attachment in your email.

The manual is 15,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info