371356
62
Zoom out
Zoom in
Previous page
1/626
Next page
56 En
This chapter explains the Initial Settings menu.
The Initial Settings menu contains digital audio
output, video, language, display, and other settings.
When a menu item is grayed out, it means that it
cannot currently be changed. The Initial Settings
cannot be changed during disc playback. You must
stop playback first.
1 Select the DVD input source, and then press
SETUP.
The Setup menu appears on-screen.
Note:
•The Initial Settings menu is available only when
the DVD input source is selected.
2 Select “Initial Settings, and then press ENTER.
The Initial Settings menu appears on-screen.
3 Use the cursor buttons ( / / / ) and
ENTER to select and change the settings.
The settings are explained below.
Notes:
•The HDMI Resolution and HDMI Color settings
only need to be changed if you’ve connected an
HDMI component to the HDMI jack.
•The Component Out and AV Connector Out
(Europe model) settings cannot be changed if
you’ve connected an HDMI component to the
HDMI jack.
•The Component Out and AV Connector Out
(Europe model) settings may change
automatically due to the HDMI Resolution and
HDMI Color settings.
•While HDMI Audio is set to on (see page 13), or a
component is connected to the HDMI jack, only
the Digital Out setting is available.
•When HDMI Audio is set to on (see page 13),
96 kHz PCM is downsampled to 48 kHz
regardless of the 96 kHz PCM Out setting.
Digital Out
Turns the OPTICAL DIGITAL OUT on and off.
On (default): OPTICAL DIGITAL OUT is on.
Off: OPTICAL DIGITAL OUT is off.
Dolby Digital Out
Turns Dolby Digital to PCM conversion on and off. If
you’ve connected the OPTICAL DIGITAL OUT to
your AV receiver/decoder and it doesn’t support
Dolby Digital, select Dolby Digital > PCM.
Dolby Digital (default): Dolby Digital signals are
output as they are.
Dolby Digital > PCM: Dolby Digital signals are
converted and output as 2-channel PCM.
DTS Out
Turns DTS to PCM conversion on and off. If you’ve
connected the OPTICAL DIGITAL OUT to your AV
receiver/decoder and it doesn’t support DTS, select
DTS > PCM.
DTS (default): DTS signals are output as they are.
DTS > PCM: DTS signals are converted and
output as 2-channel PCM.
Notes:
•If you select DTS and your AV receiver/decoder
doesnt support DTS, noise may be heard.
•When DTS > PCM is selected, you can also
choose the type of DTS downmix (see “DTS
Downmix” on page 59).
96 kHz PCM Out
Tur ns 96 kHz downsampling on and off. If you’ve
connected the OPTICAL DIGITAL OUT to your AV
receiver/decoder and it supports 96 kHz PCM, select
96 kHz.
96 kHz > 48 kHz (default): 96 kHz PCM digital
audio signals are downsampled and output at
48 kHz.
96 kHz: 96 kHz PCM digital audio signals are
output as they are.
MPEG Out
Turns MPEG to PCM conversion on and off. If you’ve
connected the OPTICAL DIGITAL OUT to an AV
receiver/decoder that supports MPEG, select MPEG.
MPEG: MPEG signals are output as they are.
MPEG > PCM (default): MPEG signals are
converted and output as 2-channel PCM.
Chapter 10: Initial Settings
Initial Settings menu
Video Output
Language
Display
Options
Initial Settings
Digital Audio Out Digital Out
Dolby Digital Out
DTS Out
96 kHz PCM Out
MPEG Out
On
Dolby Digital
DTS
96kHz > 48kHz
MPEG > PCM
Digital Audio Out settings
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha pianocraft e730 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha pianocraft e730 in the language / languages: English as an attachment in your email.

The manual is 15,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info