516897
144
Zoom out
Zoom in
Previous page
1/164
Next page
Using Your PF-1000 with Other Devices
PF-1000
144
Using the TO HOST terminal
Connect the serial port of the personal computer (RS-
232C terminal or RS-422 terminal) to the TO HOST
terminal of the PF-1000. For the connection cable, use the
appropriate cable below (sold separately) that matches
the personal computer type.
IBM-PC/AT (Windows)
Connect the RS-232C terminal on the computer to the
TO HOST terminal on the PF-1000 using a serial cable
(D-SUB 9P MINI DIN 8P cross cable). Set the PF-
1000 HOST SELECT switch to the “PC-2.” (Data
transfer rate is 38,400 bps.)
Macintosh
Connect RS-422 terminal (modem or printer) on the
computer to the TO HOST terminal on the PF-1000
using a serial cable (system peripheral cable, 8 bit). Set
the PF-1000 HOST SELECT switch to the “MAC” (Data
transfer rate is 31,250 bps).
Set the MIDI interface clock in the sequencer you are
using to 1 MHz. For details, refer to the owner’s
manual for the particular software you are using.
Using the MIDI terminals
When using a MIDI interface device installed in the
personal computer, connect the MIDI terminals of the
personal computer and the PF-1000 with standard MIDI
cables.
When the computer has a MIDI interface installed,
connect the MIDI OUT terminal of the personal
computer to the MIDI IN terminal. Set the HOST
SELECT switch to “MIDI.
When using a MIDI interface with a Macintosh series
computer, connect the RS-422 terminal of the
computer (modem or printer terminal) to the MIDI
interface, then connect the MIDI OUT terminal on the
MIDI interface to the MIDI IN terminal of the PF-1000,
as shown in the diagram below.
Set the HOST SELECT switch to “MIDI.
• When the HOST SELECT switch is set to “MIDI,” the
TO HOST terminal is disabled.
When using a Macintosh series computer, set the
MIDI interface clock setting in the application
software to match the setting of the MIDI interface
you are using. For details, refer to the owner’s
manual for the particular software you are using.
If your system does not work properly with the connections and set-
tings listed above, your software may require different settings.
Check your software operation manual and set the HOST SELECT
switch to the proper data transfer rate. (Data transfer rate of PC-1
is 31,250 bps.)
NEC
PC-9821
AS
NEC MultiSync
MINI DIN
8-pin
D-sub
9-pin
MINI DIN
8-pin
D-sub
25-pin
D-sub
9-pin
PF-1000
HOST SELECT
MIDI PC-2 MacPC-1
* When using a D-SUB 25P
MINI DIN 8P cross
cable, connect using a D-
SUB9P plug adaptor on
the computer side of the
cable.
MINI DIN
8-pin
MINI DIN
8-pin
PF-1000
HOST SELECT
MIDI PC-2 MacPC-1
NEC
PC-9821
AS
NEC MultiSync
MIDI IN MIDI OUT
MIDI OUT MIDI IN
PF-1000
HOST SELECT
MIDI PC-2 MacPC-1
MIDI IN
RS422
MIDI OUT
MINI DIN
8-pin
PF-1000
HOST SELECT
MIDI PC-2 MacPC-1
144


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha PF1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha PF1000 in the language / languages: English as an attachment in your email.

The manual is 5,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha PF1000

Yamaha PF1000 User Manual - English, German - 36 pages

Yamaha PF1000 User Manual - German - 164 pages

Yamaha PF1000 User Manual - Dutch - 162 pages

Yamaha PF1000 User Manual - French - 36 pages

Yamaha PF1000 User Manual - French - 164 pages

Yamaha PF1000 User Manual - Italian - 164 pages

Yamaha PF1000 User Manual - Spanish - 36 pages

Yamaha PF1000 User Manual - Spanish - 163 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info