516897
135
Zoom out
Zoom in
Previous page
1/164
Next page
Making Global and Other Important Settings — Function
135
PF-1000
Clock, Transmit Clock, Receive Transpose, Start/Stop
Clock
Determines whether the PF-1000 is controlled by its own internal clock or a MIDI clock signal received from an
external device. “INTERNAL” is the normal Clock setting when the PF-1000 is being used alone. If you are using the
PF-1000 with an external sequencer, MIDI computer, or other MIDI device, and you want the PF-1000 to be
synchronized to the external device, set this function to “EXTERNAL.” In the latter case, the external device must be
connected to the PF-1000 MIDI IN terminal, and must be transmitting an appropriate MIDI clock signal.
Transmit Clock
Turns MIDI clock transmission on or off. When this is set to “OFF,” no MIDI clock or START/STOP data is
transmitted.
Receive Transpose
When this parameter is set to “OFF,” note data received by the PF-1000 is not transposed, and when it is set to “ON,” the
received note data is transposed according to the current PF-1000 keyboard transpose (page 130) setting.
Start/Stop
Determines whether incoming FA (start) and FC (stop) messages affect song or
style playback.
Message Switch
SYS/EX. Tx (TRANSMIT).....................Turns MIDI transmission of MIDI system
exclusive message data ON or OFF.
SYS/EX. Rx (RECEIVE) ........................ Turns MIDI reception of MIDI exclusive data generated by external equipment
ON or OFF.
CHORD SYS/EX. Tx (TRANSMIT) ...... Turns MIDI transmission of MIDI chord exclusive data (chord detect — root and
type) ON or OFF.
CHORD SYS/EX. Rx (RECEIVE).......... Turns MIDI reception of MIDI chord exclusive data generated by external
equipment ON or OFF.
Transmitting MIDI Data Transmit
Data Types in the MIDI TRANSMIT/RECEIVE Display
* Available in RECEIVE display only (page 136).
Note Messages which are generated when the keyboard is played. Each message includes a specic note number
which corresponds to the key which is pressed, plus a velocity value based on how hard the key is played.
Control Change (CC) Control change data includes pedal and any other controller data.
Program Change (PC) Program change data corresponds to voice or patch numbers.
Pitch Bend (PB) See page 129.
After Touch (AT)* With this function, the PF-1000 senses how much pressure you apply to the keys while playing, and uses that
pressure to affect the sound in various ways, depending on the selected voice. This allows you to play with greater
expressiveness and add effects with your playing technique.
FA, FC
MIDI messages for starting/stop-
ping the song or style. The FA
message corresponds to start,
and FC corresponds to stop.
E
D
C
B
A
2 31 5 6 7 84
Determines the
channel for changing
transmit settings.
Determines the Part for the
selected channel.
Turns transmission of the
specied data type on or
off. See below for details
on the data types.
The dots corresponding
to each channel (1-16)
ash briey whenever
any data is transmitted
on the channel(s).
This determines which parts will
send MIDI data and over which
MIDI channel the data will be sent.
135


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha PF1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha PF1000 in the language / languages: English as an attachment in your email.

The manual is 5,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha PF1000

Yamaha PF1000 User Manual - English, German - 36 pages

Yamaha PF1000 User Manual - German - 164 pages

Yamaha PF1000 User Manual - Dutch - 162 pages

Yamaha PF1000 User Manual - French - 36 pages

Yamaha PF1000 User Manual - French - 164 pages

Yamaha PF1000 User Manual - Italian - 164 pages

Yamaha PF1000 User Manual - Spanish - 36 pages

Yamaha PF1000 User Manual - Spanish - 163 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info