140113
25
Zoom out
Zoom in
Previous page
1/282
Next page
24
Symptoms That Appear to be Failures
Make the checks suggested below depending on the symptoms observed. If the symptoms remain uncorrected, contact your dealer.
TROUBLESHOOTING
CAUTION
Customer servicing can be hazardous.
See page
28
11
11
13
12
29
26
26
9
16
11
17
20
20
Symptom
No picture with the power-indicating lamp
off.
The message No Sync. Signal or Power
Save is displayed.
No picture, with the power indicating lamp lit
orange.
The message Invalid Scan Freq. is
displayed.
The power indicating lamp is lit normally but
no picture displays.
The display image appears flowing
slantwise.
Text displayed across the screen appears
vertically streaked, with the characters in
vertical columns blurred.
Text displayed across the screen appears
blurred.
A fine pattern flickers when displayed on the
screen.
The remote control does not work.
Point to check
Check the way the power cable is connected.
Press the power switch.
No sync signal is detected.
Check the way the signal cable is connected.
Make sure that the switch of the computer, imaging equipment ,
etc., is turned on.
Make sure the computer is not in the power-save mode.
Check to see if the input selection matches the connection
terminal.
An input signal is not received normally.
Check to see if the input signal matches the monitor
specifications.
Check the way the signal cable is connected.
Check the contrast and brightness settings (adjust them for
higher contrast and brightness).
Check the way the signal cable is connected.
Adjust the dot clock frequency and phase. (Adjust the dot clock
frequency first, the dot clock phase next.)
(RGB input)
Adjust the dot clock phase for the clearest viewing.
(RGB input)
Check to see if the batteries are loaded in the remote control in
opposite direction.
Check to see if the batteries in the remote control are OK.
Check if the setting of remote control ID no. is correct.
! No Sync. Signal
! Invalid Scan Freq.
012_PDM-4210_G_ENG 2003.12.24 01:16 ページ 24 (ブラック 版)
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha pdm 4210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha pdm 4210 in the language / languages: English, German, French, Swedish, Spanish as an attachment in your email.

The manual is 7,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha pdm 4210

Yamaha pdm 4210 User Manual - English - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info