516895
33
Zoom out
Zoom in
Previous page
1/49
Next page
33
P-80
The Function Mode
In any MIDI control setup, the MIDI channels of the transmitting and receiving equipment must
be matched for proper data transfer. A “Multi-timbre” receive mode is also available, which allows
simultaneous reception of different parts on all 16 MIDI channels, allowing the P-80 to play multi-
channel song data received from a music computer or sequencer. There’s also a “1-2” mode which
allows simultaneous reception on channels 1 and 2.
Use the [–/NO] and [+/YES] buttons to select the desired transmit or receive channel. The transmit
channel parameter can also be turned “OFF” if you don’t want the P-80 to transmit any MIDI data. To select
the multi-timbre receive mode, set the receive channel to “ALL”. Select “1-2” for multi-timbre reception on
channels 1 and 2 only.
Press the [–/NO] and [+/YES] buttons simultaneously to recall the default setting: transmit = “1”;
receive = “ALL”.
NOTE
In the dual mode first voice data is transmitted on its set channel, and in the split mode right voice data is
transmitted on its set channel. In the dual mode second voice data is transmitted on the next greater channel
number of the set channel, and in the split mode left voice data is transmitted on the next greater channel
number of the set channel. In either mode, no data is transmitted if the transmit channel is set to OFF.
Demo/preset song data and recorder playback data are not transmitted via MIDI.
No MIDI reception occurs when the demo/preset song mode is engaged.
Program change and other like channel messages received will not affect the P-80s panel settings or what is
being played on the keyboard.
F8.3: Local Control ON/OFF..........................................................................................................................
“Local Control” refers to the fact that, normally, the P-80 keyboard controls its internal tone
generator, allowing the internal voices to be played directly from the keyboard. This situation is
“Local Control On” since the internal tone generator is controlled locally by its own keyboard.
Local control can be turned OFF, however, so that the P-80 keyboard does not play the internal
voices, but the appropriate MIDI information is still transmitted via the MIDI OUT connector when
notes are played on the keyboard. At the same time, the internal tone generator responds to MIDI
information received via the MIDI IN connector.
Use the [–/NO] and [+/YES] buttons to turn local control “On” or “OFF”.
Press [–/NO] and [+/YES] buttons simultaneously to recall the default setting “On”.
F8.4: Program Change ON/OFF ................................................................................................................
Normally the P-80 will respond to MIDI program change numbers received from an external
keyboard or other MIDI device, causing the correspondingly numbered voice to be selected on the
corresponding channel (the keyboard voice does not change). The P-80 will normally also send a
MIDI program change number whenever one of its voices is selected, causing the correspondingly
numbered voice or program to be selected on the external MIDI device if the device is set up to
receive and respond to MIDI program change numbers.
This function makes it possible to cancel program change number reception and transmission so
that voices can be selected on the P-80 without affecting the external MIDI device.
Use the [–/NO] and [+/YES] buttons to turn program change transmission and reception “On” or
“OFF”.
Press the [–/NO] and [+/YES] buttons simultaneously to recall the default setting “On”.
NOTE
For information on program change numbers for each of the P-80s voices, refer to page 42 in the MIDI Data
Format section.
31
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha P80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha P80 in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha P80

Yamaha P80 User Manual - German - 49 pages

Yamaha P80 User Manual - German - 49 pages

Yamaha P80 User Manual - Dutch - 48 pages

Yamaha P80 User Manual - French - 49 pages

Yamaha P80 User Manual - Italian - 49 pages

Yamaha P80 User Manual - Portuguese - 44 pages

Yamaha P80 User Manual - Spanish - 49 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info