588674
13
Zoom out
Zoom in
Previous page
1/22
Next page
TOOLS for P-250 Installation Guide 13
English
Setting up OMS
(For USB connection)
The OMS studio setup file for the P-250 is contained in the included
CD-ROM. This studio setup file is used for setting up OMS.
n Before performing the following procedure, the OMS and USB MIDI
Driver should be installed.
1 Use a USB cable to connect the USB terminal of the computer (or
the USB hub) to the USB terminal of the P-250 and turn the P-250’s
power on.
2 Start the computer.
3 Insert the included CD-ROM into the CD-ROM drive of your Mac-
intosh computer.
The CD-ROM icon appears on the desktop.
4 Double-click on the CD-ROM icon, “OMS_”, and “OMS Setup for
YAMAHA.
The file “P-250-USB” appear. Copy these to the hard disk on your
computer.
n If you want to use a serial connection instead of using USB, please
copy and use the following files.
“P-250-Printer”
Use this for serial connection via the printer port.
“P-250-Modem”
Use this for serial connection via the modem port.
n When using the serial connection for the File Utility, set the MIDI
Out:/ MIDI In: setting in the OMS Port Setup to MIDI Time Piece-
Printer, or MIDI Time Piece-Modem.
5 Double-click on the “P-250-USB” file to start the OMS Setup.
6 After starting the OMS Setup, the Studio setup file double-clicked in
step #5 opens.
n If “ ” is not indicated at the right of the setup file name, select
“Make Current” from the “File” menu and execute the save opera-
tion.
The OMS studio setup has been completed.
n After the OMS studio setup above has been completed, your compu-
ter will recognize only the P-250 as a MIDI instrument. If you use an-
other MIDI instrument in addition to the P-250 or you add a second
P-250 to the existing system, you should create an original Studio
Setup file. For details, refer to the on-line manual supplied with the
OMS.
Indicates this setup is available
Depending on the Macintosh and operating system version that you
are using, the included studio setup file for the P-250 still may not
work even after you have performed the above steps. (MIDI trans-
mission and reception will not be possible even if the setup is valid.)
In this case, use the following procedure to re-create the setup file.
1 Connect the P-250 and Macintosh via USB or serial cable, and
turn on the power of the P-250.
2 Start up OMS Setup, and from the “File” menu, choose “New
setup.
3 The OMS driver search dialog box will appear. Check [Modem]
or [Printer] if you are using a serial connection. Uncheck both of
these if you are using a USB connection.
4 Click the [Find] button to search for the device.
When the search has succeeded, the OMS Driver Setting dialog
box will display the following.
For a USB connection: USB-MIDI 1
For a serial connection: MIDI Time Piece-Modem (Printe_)
If the device was found correctly, click the [OK] button to pro-
ceed.
If the device was not found, re-check that the cable connec-
tions are correct, and repeat the procedure from step 1.
5 Make sure that the port is shown below the device that was found.
(In the case of the P-250, this will be a name such as USB-MIDI,
Modem, or Printer.) Check the check box for the port, and then
click the [OK] button.
6 A dialog box will appear, allowing you to name the file that will
be saved. Input the desired filename, and click [Save].
This completes OMS setup.
7 From the “Studio” menu, choose “Test,” and click the port icon.
If a channel sounds on the P-250, the system is operating cor-
rectly.
For details on using OMS, refer to OMS_2.3_Mac.pdf, included with
OMS.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha P-250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha P-250 in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha P-250

Yamaha P-250 User Manual - English - 102 pages

Yamaha P-250 User Manual - German - 16 pages

Yamaha P-250 User Manual - German - 102 pages

Yamaha P-250 User Manual - French - 16 pages

Yamaha P-250 User Manual - French - 102 pages

Yamaha P-250 User Manual - French - 36 pages

Yamaha P-250 User Manual - Italian - 105 pages

Yamaha P-250 User Manual - Spanish - 16 pages

Yamaha P-250 User Manual - Spanish - 102 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info