516975

Yamaha NX-50 Manual

7
Zoom out
Zoom in
Previous page
1/52
Next page
2 En
En
3 p (power)/indicator (LED)
When you press p (power), the speakers will turn on and the indicator
will light up. Also, the auto-standby mode will be available.
Even when the speakers are turned off or are in standby mode, they consume a
small amount of electricity.
This unit has a function that automatically activates standby mode
(power save mode) when this unit is turned on and no audio signal is
input or when the connected device is playing at a low volume for a
certain amount of time (about 30 minutes).
In standby mode, the indicator light goes off.
When a connected device is played while the speakers are in standby
mode, the speakers activate automatically and sound is output.
When p (power) is pressed again, the speakers turn off.
• The time before entering standby mode is only a guide. It varies depending on
the usage environment.
• If the sound from a connected device is too low, the speakers may not activate. In
this case, turn up the volume of the connected device.
• If you are using devices, such as mobile phones, which emit electromagnetic
waves near the speakers, the speakers may activate by themselves, or not enter
standby mode.
4 AUDIO INPUT 1/2 (input connectors)
Connects with external devices, such as portable players, using the
supplied 3.5 mm stereo mini plug cable.
5 TO LEFT SPEAKER
Connects with a cable from the L speaker (left) through this connector.
6 12V (DC 12V)
Make sure you use the supplied AC adaptor.
Auto-standby
Note
OFF ON
Viewing the p (power)
button from the side…
Status indicator (LED)
z
No light
{
Light
Sound signal
p
(power) off
p
(power) on
Present
z
{
Not present
z
{
→
z
After about
30 minutes
Notes
Perform the following procedure to exit standby mode.
a Turn up the output level of the connected device.
b Rotate the VOL (volume) control of this unit and adjust to the desired sound
level.
f
e
d
R speaker (right)
L speaker (left)
R
ear pane
l
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha NX-50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha NX-50 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info