555564
7
Zoom out
Zoom in
Previous page
1/88
Next page
4 En
English
Example: Connecting the subwoofer to an amplifier that
features one set of speaker output terminals
Use speaker cables to connect the speaker output terminals of the amplifier to the
subwoofer’s INPUT 1 (FROM AMPLIFIER) terminals. Connect the front speakers to the
subwoofer’s OUTPUT (TO SPEAKERS) terminals. Although the subwoofer is connected
between the front speakers and the amplifier, the sound volume or quality will not be
affected.
Connecting one subwoofer
Connecting two subwoofers
Before connecting
Remove 10 mm (3/8") of insulation from the ends of the
speaker cables.
How to connect
1. Loosen the terminal’s knob, as shown in the figure.
2. Insert the bare wire.
3. Tighten the knob.
4. Test the firmness of the connection by pulling lightly
on the cable at the terminal.
Notes
Make sure that the “+” and “–” polarity markings of the speaker cables are observed and set
correctly. If these cables are reversed, the sound will be unnatural and lack bass.
Do not let the bare speaker wires touch each other, because this could damage the subwoofer
or the amplifier.
If the connections are faulty, no sound will be heard from the subwoofer or the speakers. Do
not insert the insulation into the hole. Sound may not be produced.
To avoid accidents resulting from tripping over loose speaker cables, fix them to the floor.
Connecting to speaker output terminals of the amplifier
2
Right front
speaker
Subwoofer
To AC outlet
Left front
speaker
Speaker output
terminals
Amplifier or
receiver
Right front
speaker
To AC outlet
To AC outlet
Subwoofer Subwoofer
Left front
speaker
Speaker output
terminals
Amplifier or
receiver
Example: Connecting the subwoofer to an amplifier featuring two
sets of speaker output terminals (A and B) that can output sound
signals simultaneously
Set the amplifier so that both sets of speaker output terminals (A and B) will output
sound signals simultaneously. Then, connect the front speakers to terminals A, and
connect the subwoofer to terminals B.
Note
If your amplifier features two sets of speaker output terminals that do NOT output sound
signals simultaneously, please refer to the example for connecting an amplifier that has
only one set of speaker output terminals (see the figure on the left).
Connecting to the INPUT1/OUTPUT terminals of the subwoofer
Connecting the banana plug
1. Tighten the terminal knob.
2. Simply insert the banana plug into the terminal.
10 mm
(3/8")
Good No Good
2
1
3
Red:
positive (+)
Black:
negative (
)
2
1
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha NS-SW500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha NS-SW500 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 4,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info