Manual Yamaha NS-SW300 (page 5 of 148) (English, German, Dutch, French, Italian, Swedish, Spanish)

555562

Zoom out

Zoom in

1/148

2 En

English

• This subwoofer system employs Advanced Yamaha

Active Servo Technology II, which Yamaha has

developed for the production of higher quality, super-

bass sound. This super-bass sound adds a more realistic,

theater-in-the-home effect to your stereo system.

• This subwoofer can easily be added to your existing audio

system by connecting to either the speaker terminals or the

line output (pin jack) terminals of the amplifier.

• For effective use of the subwoofer, the subwoofer’s

super-bass sound should be matched to the sounds of

your front speakers. You can create the best sound

quality for various listening conditions by using the

HIGH CUT control and the PHASE switch.

• The Automatic power-switching function saves you the

trouble of pressing the STANDBY/ON button to turn the

power on and off.

• The subwoofer can be linked to a Yamaha component for

simultaneous power on/off operation.

Use the supplied system control cable to connect the

subwoofer to a Yamaha component that features a

system connector jack. When you turn on or off the

power to the connected component, the subwoofer will

also be turned on or off.

• The flared, gently twisting shape diffuses the vortex of

air generated around the edge of the port, creating a

smooth flow of air. This reduces extraneous noise not

present in the original input signal, and provides clear,

accurate low frequency reproduction.

• The subwoofer can also reproduce a bass sound that is

appropriate for the source. (NS-SW300 only)

It features a B.A.S.S. switch that enables you to select a

bass effect that is suitable for the source.

After unpacking, check

that the following

accessory is contained.

FEATURES

SUPPLIED ACCESSORY

System control cable (5 m x 1)

Since the low-end frequencies of audio signals feature long wavelengths, they are almost non-directional to human ears.

The super-bass range does not create a stereo image. Therefore, a single subwoofer may be enough to produce a high-

quality super-bass sound. However, using two subwoofers (similarly to L and R front speakers) can enhance your acoustic

experience.

Place the subwoofer as shown in fig. , or for the optimum effect. : subwoofer : front speaker

Using one subwoofer

Place the subwoofer on the outside of either the left or right

front speaker.

Placing the subwoofer in between the left and right

front speakers

If you are placing the subwoofer in between the left and

right front speakers, position it slightly at an angle toward

the wall for better effect.

Using two subwoofers

Place them on the outside of

each front speaker.

Notes

• This unit features a magnetically shielded design. However, there is still a chance that placing it too close to a CRT-type TV set

might impair picture color. Should this happen, move this unit away from the TV set.

• If the speaker volume is very loud, furniture or window glass may resonate and the subwoofer itself may vibrate. In this case,

lower the volume level. To limit resonance, use a thick curtain or similar cloth that tends to absorb sound vibrations effectively.

Also, changing the subwoofer position may be helpful.

PLACEMENT

Subwoofer orientation

Note

The placement shown in the figure below is also possible.

However, if the subwoofer system is placed directly facing a wall,

the bass effect may suffer due to phase cancellation caused by

the interference between the direct and reflected sounds.

To prevent this from happening, place the

subwoofer system at an angle.

(Figures , , and ).

There may be a case that you

cannot obtain enough super-bass

sound from the subwoofer due to

standing waves.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha NS-SW300 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 7,97 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Yamaha NS-SW300 Manual

Product: