Manual Yamaha NS-PA40 (page 8 of 76) (English, German, Dutch, French, Italian, Swedish, Spanish)

555592

Zoom out

Zoom in

1/76

5 En

Connecting the speakers

■ Preparing the speaker cables

Once you’ve positioned the speakers, you’ll need to cut

the 24.5-meter (80 ft.) speaker cable to make five

cables for connecting the two front speakers, center

speaker, and the two surround speakers.

1 Cut the included speaker cable to suitable

lengths for the front, center, and surround

speakers. You need five cables.

2 Remove about 10 mm (3/8") of insulation from

the end of each speaker cable.

3 Twist the bare wires tightly.

Note

• Make the speaker cables as short as possible. Do not

bundle or roll up excess cable.

• Be careful not to trip on the speaker cable.

Otherwise, the speaker may tip over, possibly

resulting in personal injury.

• Twist the bare wires tightly so the individual strands

are not splayed.

• Be careful not to injure yourself while preparing the

speaker cables.

■ Operating the speaker terminals

1 Press and hold the terminal tab.

2 Insert the bare wire.

3 Release the tab so that it closes securely on the

bare wire, not the insulation.

4 Test the security of the connection by pulling

gently on the cable.

Note

• Make sure the bare wires do not touch each other, as

this could damage the speaker or the amplifier.

• If the connections are faulty, you will hear no sound

from the speakers.

■ For the front speakers

1 After connecting the cable, fit it into the

groove on the rear panel of each Bottom.

2 After the cable is fit in place down to the Base,

pass the cable through the hole in the Base.

Pull the cable gently from the underside of the

Base and pass it through the notch on the

Base.

Good No Good

10 mm (3/8")

Positive (+)

Negative (–)

Note: Make sure the

terminal is gripping the

bare wire, not the

insulation.

Front speaker’s

rear panel

Pass the cable behind the four

projections.

Projection

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha NS-PA40 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Yamaha NS-PA40 Manual

Product: