Manual Yamaha NS-P51 (page 7 of 32) (English, German, French, Spanish)

712857

Zoom out

Zoom in

1/32

5 En

Specifications

English

■ Operating the speaker terminals

1 Rotate the speaker terminal counterclockwise to loosen it.

2 Insert the bare wire.

3 Rotate the speaker terminal clockwise to tighten it.

Test the security of the connection by pulling gently on the

cable.

• Make sure the terminal is gripping the bare wire, not the insulation.

• Make sure the bare wires do not touch each other, as this could damage the speaker or amplifier.

• If the connections are faulty, you will hear no sound from the speakers.

■ Connecting to an amplifier

Connect each speaker to the appropriate speaker terminals on your amplifier by using the cables you prepared earlier.

For details, see the “Connection diagram” (page 4).

For the surround speakers only, connect one speaker to the left (marked L) terminals of your amplifier or receiver,

and another speaker to the right (marked R) terminals.

Please refer to the owner’s manual that came with your amplifier or receiver.

• Make sure you connect the speakers with the correct polarity—positive (+) terminals to positive (+) terminals, and

negative (–) terminals to negative (–) terminals. If you get them crossed over, the sound will be unnatural and lack bass.

• In your AV receiver’s speaker size settings, specify small (or “S”) for all of the speakers.

• The speaker may be damaged if certain sounds are continuously output at high volume level. For example, if sine waves

from a test disc, bass sounds from electronic instruments, etc., are continuously output, or when the stylus of a turntable

touches the surface of a disc, reduce the volume level to prevent the speaker from being damaged.

• Once you have connected all of the speakers, plug the amplifier and other AV components into suitable AC wall outlets.

• When using an amplifier with a rated output power higher than the nominal input power of the speaker, care should be

taken never to exceed the speaker’s maximum input.

■ When using a banana plug

1 Tighten the terminal knob.

2 Simply insert the banana plug into the terminal.

■ Center speaker (NS-C51)

Type..................................................2-way acoustic suspension

Magnetic shielding type

Driver Woofer...................................10 cm (4") cone type x 2

Tweeter.................2.2 cm (7/8") balanced dome type

Nominal input power ....................................................... 60 W

Maximum input power .................................................. 180 W

Impedance .............................................................Nominal 6 Ω

Frequency response ......................................... 70 Hz - 36 kHz

Sensitivity ......................................................92 dB/2.83 V, 1 m

Dimensions (W x H x D) ........................415 x 135 x 167 mm

(16-3/8" x 5-3/8" x 6-5/8")

Wei ght ................................................................. 3.3 kg (7.3 lbs)

■ Surround speakers (NS-B51)

Type..................................................2-way acoustic suspension

Non-magnetic shielding type

Driver Woofer.........................................10 cm (4") cone type

Tweeter.................2.2 cm (7/8") balanced dome type

Nominal input power....................................................... 50 W

Maximum input power .................................................. 150 W

Impedance .............................................................Nominal 6 Ω

Frequency response ......................................... 69 Hz - 36 kHz

Sensitivity ......................................................89 dB/2.83 V, 1 m

Dimensions (W x H x D) ........................148 x 252 x 150 mm

(5-7/8" x 9-7/8" x 5-7/8")

Wei ght ................................................................. 2.1 kg (4.6 lbs)

Specifications are subject to change without notice.

Positive (+)

Negative (–)

Loosen

Tighten

Note

Banana plug

Specifications

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha NS-P51 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 1,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Yamaha NS-P51 Manual

Product: