Manual Yamaha NS-F500 (page 4 of 36) (English, German, French, Spanish)

555200

Zoom out

Zoom in

1/36

4 En

Notes

• Be sure to have another person support it.

• Pay extra attention to avoid scratching the speaker’s surface.

• Be careful not to apply force to the side of the speaker,

otherwise the speaker may fall causing damage to the

speaker or personal injury.

• To avoid accidents resulting from tripping over loose

speaker cables, affix them to the floor.

• Placing this unit too close to a CRT TV set might impair

picture color or create a buzzing noise. In this case, move the

speakers away from the TV. This is not an issue with LCD

and plasma TVs.

• The legs feature an adjustment function that enables you to

fine-tune the speaker height. If the speaker rattles on the

floor, adjust the length of the legs by turning them. Do not

loosen the legs too much. Otherwise, they may come off.

■ Attaching the spikes

At the time of shipment, legs are attached to the speaker. When

you use the supplied spikes, please remove the legs first.

If you are setting up the speaker on a thick carpet, you can

replace the legs with the spikes to increase stability and

improve sound quality. Remove the legs by turning them,

then follow the steps below:

Notes

• Be sure to have another person support it.

• The tips of the spikes may scratch or damage the flooring.

Please be careful when positioning the speakers.

• The tips of the spikes are sharp. When you adjust the protruding

length of the spikes, be careful not to injure your fingers.

1. Lay the speaker on the floor.

Use a blanket or cushion to avoid scratches.

2. Screw each spike into a spike nut so that the nut will stay

near the tip of the spike.

3. Remove the legs and screw the spikes into the holes on

the bottom of the speaker.

Place the speaker in the desired location in an upright

position. If necessary, adjust the length of the spike to

match the depth of the carpet by repeating the above-

mentioned steps.

5. When the length adjustment is complete, firmly tighten

the spike nut to the base on the bottom of the speaker.

Before making connections, make sure that the amplifier is

switched off.

Leg

Loosen

(higher)

Tighten

(lower)

Spike

Spike nut

CONNECTING TO YOUR

AMPLIFIER

Standard connections

Note

Do not insert the insulation into the hole.

If the connections are faulty, you will hear no sound

from the speaker.

Insulation coating

Bare wire

Loosen

Tighten

Black (–)

Red (+)

Amplifier

or Receiver

Speakers

output

terminals

NS-F500 NS-F500

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha NS-F500 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 2,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Yamaha NS-F500 Manual

Product: