Manual Yamaha NS-B951 (page 4 of 40) (English, German, French, Spanish)

555603

Zoom out

Zoom in

1/40

3 En

This speaker system is capable of standard connections and bi-wired connections. Before making

connections, make sure that the amplifier is switched off.

■ CONNECTIONS

You need a commercially available speaker cable.

The size and/or material of a speaker cable affects on the

sound quality. Therefore, we recommend you purchase a

high-quality speaker cable to exert the performance of this

unit.

• Connect the + terminals on the amplifier and the

speakers using one side of the cable. Connect the –

terminals on both components using the other side

of the cable.

• Connect one speaker to the left (L) terminals of your

amplifier, and another speaker to the right (R)

terminals, making sure not to reverse the polarity (+,

–). If one speaker is connected with reversed

polarity, the sound will be unnatural and lack bass.

• When using an amplifier with a rated output power

higher than the nominal input power of the speaker,

care should be taken never to exceed the speaker’s

maximum input.

• The speaker may be damaged if certain sounds are

continuously output at high volume level. For

example, if sine waves from a test disc, bass sounds

from electronic instruments, etc., are continuously

output, or when the stylus of a turntable touches the

surface of a disc, reduce the volume level to prevent

the speaker from being damaged.

• Please refer to the owner’s manual that came with

your amplifier or receiver.

How to connect:

1 Loosen the knob.

2 Remove 15 mm (5/8") of insulation from each end

of the cables, and twist the exposed conductors

together neatly and tightly, as shown below.

3 Insert the bare wire into the hole.

4 Tighten the knob and secure the cable.

5 Test the firmness of the connection by pulling the

cable lightly at the terminal.

• Do not let the bare speaker wires touch each other as

this could damage the speaker and/or the amplifier.

• Do not insert the insulation coating into the hole.

The sound may not be produced.

When connecting the speaker cable, leave the

jumper cables in place.

CONNECTING TO YOUR AMPLIFIER

Notes

Good

No Good

15 mm

(5/8")

SPEAKERS

–

Tighten

Loosen

Insulation coating

Bare wire

NS-B951 (R) NS-B951 (L)

Amplifier

Speaker

terminals of

the amplifier

Jumper cable

Red (+)

Black (–)

Terminal hole*

Leave the jumper

cables in place when

connecting.

Connect the + speaker cable to the upper red terminal and

then – speaker cable to the lower black terminal.

*The terminal hole is 5 mm (1/4”) in diameter.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha NS-B951 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 3,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Yamaha NS-B951 Manual

Product: