Manual Yamaha NS-B500 (page 5 of 36) (English, German, French, Spanish)

555601

Zoom out

Zoom in

1/36

5 En

English

Before making connections, make sure that the amplifier is

switched off.

■ When connecting the speaker cable

• Do not let the bare speaker wires touch each other as this

could damage the speaker or the amplifier.

• Make sure you connect the speakers with the correct

polarity—positive (+) terminals to positive (+)

terminals, and negative (–) terminals to negative (–)

terminals. If you get them crossed over, the sound will be

unnatural and lack bass.

• Please refer to the owner’s manual that came with your

amplifier or receiver.

■ How to connect the speaker cables

1. Loosen the terminal knob.

2. Remove 10 mm (3/8") of insulation from each end of the

cables, and twist the exposed conductors together neatly

and tightly, as shown below.

3. Insert the bare wire.

4. Tighten the knob and secure the cable.

5. Test the firmness of the connection by pulling lightly on

the cable at the terminal.

Notes

• When using an amplifier with a rated output power higher

than the nominal input power of the speaker, care should be

taken never to exceed the speaker’s maximum input.

• The speaker may be damaged if certain sounds are

continuously output at high volume level. For example, if sine

waves from a test disc, bass sounds from electronic

instruments, etc., are continuously output, or when the stylus

of a turntable touches the surface of a disc, reduce the volume

level to prevent the speaker from being damaged.

■ When using a banana plug

1. Tighten the terminal knob.

2. Simply insert the banana plug into the terminal.

The speaker and the grille are packed separately. To attach the

grille, line up the projections (magnets) on the reverse side of

the grille with their corresponding screw heads on the speaker.

Notes

• When removing the grille, be careful not to touch the drive

units, and not to exert excessive force with any tools.

• Do not touch or apply impact to the speaker's diaphragm.

Otherwise, the speaker may malfunction.

• There are magnets on the reverse side of the grille. Do not

place the grille close to objects that might be affected by

magnets, such as CRT TV, clock, magnetic card, diskette,

etc., after removing it.

CONNECTING TO YOUR

AMPLIFIER

Standard connections

Loosen

Tighten

Black (–)

Insulation coating

Red (+)

Bare wire

NS-B500

(Right) (Left)

Amplifier or

Receiver

Speakers

output

terminals

Note

Do not insert the insulation into the hole.

If the connections are faulty, you will hear no sound

from the speaker.

NS-B500

10 mm

(3/8")

Good No Good

ATTACHING THE GRILLE

Banana plug

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha NS-B500 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 1,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Yamaha NS-B500 Manual

Product: