Manual Yamaha NS-101 (page 5 of 24) (English, German, French, Spanish)

557719

Zoom out

Zoom in

1/24

DeutschFrançais EspañolEnglish

E-

CONNECTIONS

• Connect the screw-type input terminals at the rear of the speakers to the speaker output terminals of the

ampliﬁer (or receiver) with the provided speaker cables.

• Connect the (+) terminals on the ampliﬁer (or receiver) and speakers using the one side of cable. Connect the

(–) terminals on both components using the other side of the cable.

How to connect

Loosen the knob.

Insert the bare wire.

Remove the insulation

coating at the extremity of each speaker cable

by twisting the coating off.

Tighten the knob and secure the cable.

Test the ﬁrmness of the connection by pulling

lightly on the cable at the terminal.

When using a banana plug

Remove the cover by pulling it toward you.

Tighten the terminal knob.

Insert the banana plug into the terminal.

The front cover is fastened to the enclosure at four

points and can be removed if desired.To remove the

cover, hold on to both sides and slowly pull straight

away from the speaker. To reattach, line up the four

holes on the inner surface of the cover with the four

corresponding pegs on the speaker and push gently.

Note:

When the cover is removed, be sure not to touch

the speaker units with your hands or to exert

excessive force with any tools.

Notes:

• Make sure that the bare wires are not touching each other as this could damage the speaker and ampliﬁer.

• Connect one speaker to the left terminals of your ampliﬁer, and another speaker to the right terminals,

making sure not to reverse the polarity (+, –). If one speaker is connected with reversed polarity, the sound

will be unnatural and lack bass.

Loosen

Tighten

Red (+)

Black (–)

(–)

(+)

Banana

plug

REMOVING THE FRONT COVER

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha NS-101 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 1,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Yamaha NS-101 Manual

Product: