635442
8
Zoom out
Zoom in
Previous page
1/28
Next page
Setting Up
NP-31/NP-11 Owner’s Manual
8
Make sure to properly connect all external devices you are using (as shown below)
BEFORE turning the power on.
A pair of stereo headphones with a 1/4" stereo phone
plug can be plugged in the PHONES/OUTPUT jack
for convenient monitoring. The speakers are automati-
cally shut off when a plug is inserted into this jack.
The PHONES/OUTPUT jack also functions as an
external output. You can connect the PHONES/OUT-
PUT jack to a keyboard amplifier, stereo system,
mixer, tape recorder, or other line-level audio device
to send the instrument’s output signal to that device.
The SUSTAIN jack is for connecting the Footswitch or
foot pedal. The pedal functions in the same way as a
damper pedal on an acoustic piano. Connect an optional
footswitch FC4/FC5 to this jack and press the pedal to
sustain the sound. An optional FC3 Foot Pedal can also
be connected to this jack. If you connect an optional
FC3 Foot Pedal, the half pedal function* can be used.
* Half pedal function
If you are playing the piano with sustain but want to make the sound
between notes clearer, slightly release your foot from the pedal,
keeping the pedal down in half position or less.
Turn down the volume by turning the [MASTER
VOLUME] dial to the MIN position and press the
[ ] (Standby/On) switch to turn on the power. Press
the [ ] (Standby/On) switch again for a second to
turn the power to standby.
While playing the keyboard, adjust the volume level
by using the [MASTER VOLUME] dial.
To prevent unnecessary power consumption, this
instrument features an Auto Power Off function that
automatically turns the power off if the instrument is
not operated for 30 minutes.
The Auto Power Off function can be set to on or off;
see page 18.
The instrument includes a music rest that can be
attached to the instrument by inserting it into the slot
at the top of the control panel.
Connecting Headphones or an Audio
Device (PHONES/OUTPUT Jack)
• Avoid listening with the headphones at high volume for
long periods of time; doing so may not only result in ear
fatigue, it may be damaging to your hearing.
• To prevent damage to the speakers, set the volume of the
external devices at the minimum setting before connecting
them. Failure to observe these cautions may result in elec-
tric shock or equipment damage. Also, be sure to set the
volumes of all devices at their minimum levels and gradu-
ally raise the volume controls while playing the instrument
to set the desired listening level.
Connecting a Footswitch or a Foot
Pedal (SUSTAIN Jack)
CAUTION
CAUTION
Make sure that the power is OFF when connecting or disconnecting the
Footswitch or the Foot Pedal.
Do not turn the power on while pressing the Footswitch or the Foot Pedal.
Otherwise, the switch or pedal type (on/off) will be reversed.
Turning the Power On
• Even when the switch is set to standby, electricity is still
flowing to the instrument at the minimum level. When you
are not using the instrument for a long time, make sure you
unplug the AC power adaptor from the wall AC outlet, and/
or remove the batteries from the instrument.
All panel settings are reset to the default values whenever the power is
turned off.
Auto Power Off Function
Using the Music Rest
NOTE
CAUTION
NOTE
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha NP-31 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha NP-31 in the language / languages: English as an attachment in your email.

The manual is 2,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha NP-31

Yamaha NP-31 User Manual - German - 28 pages

Yamaha NP-31 User Manual - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info