571260
65
Zoom out
Zoom in
Previous page
1/71
Next page
File Utility RemotePerformance Song/Pattern
MX49/MX61 Reference Manual
Utility
General
MIDI
Controllers
Remote
Utility Job
QuickSeup
Factory Set
Version
65
KnobFuncDispSw
(Knob Function display
switch)
Determines whether the Knob Function display (which shows the functions of Knobs [A] – [D] and their
settings) is called up or not when pressing the [KNOB FUNCTION] button.
Settings: Settings: off, on
KnobDispTime
(Knob Function display
switch)
Determines whether or not the Knob Function display appears when operating the Knobs, and how long the
display will continue to be shown.
Settings: off, 1 sec, 1.5 sec, 2 sec, 3 sec, 4 sec, 5 sec, keep
off..................... When this selected, the display is not called up even if you operate the Knobs.
1 sec – 5 sec.... Turning one of the Knobs will cause the display to appear after an elapsed time of between
1 – 5 seconds, and then automatically close.
keep................. Operating the Knob will cause the popup to be shown continuously until you press a
button.
StartUp Determines the default power-on Performance—letting you select which Performance is automatically
called up when you turn the power on.
Settings: 1 -128
AutoOff
(Auto Power Off time)
Determines the amount of time that elapses before the power is automatically turned off if the instrument is
not operated for a specified period of time. Default setting is “30min.”
Settings: off (Disables Auto Power Off), 5min, 10min, 15min, 30min, 60min, 120min (minutes)
NOTE
You can set this parameter to “off” by holding down the lowest key on the keyboard and turning the power
on. This operation retains the “off” setting even if the power is turned off.
MIDI
Parameter Description
MIDI IN/OUT Determines which physical output/input terminal(s) will be used for transmitting/receiving MIDI data.
Settings: MIDI, USB
NOTE
The two types of terminals above cannot be used at the same time. Only one of them can be used to
transmit/receive MIDI data at a time.
LocalCtrl
(Local Control switch)
Determines whether or not the tone generator of the instrument responds to your keyboard playing. Normally,
this should be set to “on”—since you’ll want to hear the sound of the MX49/MX61 as you play it. Even if this is
set to “off,” the data will be transmitted via MIDI. Also, the internal tone generator block will respond to
messages received via MIDI.
Settings: off (disconnect), on (connect)
BankSel
(Bank Select)
Determines whether or not this instrument enables Bank Select messages to be both transmitted and
received. When this is set to “on,” this synthesizer responds to incoming Bank Select messages, and it also
transmits appropriate Bank Select messages (when using the panel).
Settings: off, on
PgmChange
(Program Change)
Determines whether or not this instrument enables Program Change messages to be both transmitted and
received. When this is set to “on,” this synthesizer responds to incoming Program Change messages, and it
also transmits appropriate Program Change messages (when using the panel).
Settings: off, on
Parameter Description
*Cut**Rez**Cho**Rev
(+34)*:00***40***12
+
Knob Function display appears when pressing [KNOB FUNCTION].
qw**Common*Cutoff***
e*******(+15)******
r
Knob Function display appears when operating the Knobs.
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MX61 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MX61 in the language / languages: English as an attachment in your email.

The manual is 16,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MX61

Yamaha MX61 Installation Guide - English - 4 pages

Yamaha MX61 User Manual - English - pages

Yamaha MX61 User Manual - English - 48 pages

Yamaha MX61 User Manual - German - 15 pages

Yamaha MX61 Installation Guide - German - 4 pages

Yamaha MX61 User Manual - German - 71 pages

Yamaha MX61 User Manual - German - 50 pages

Yamaha MX61 User Manual - Dutch - 71 pages

Yamaha MX61 User Manual - Dutch - 48 pages

Yamaha MX61 User Manual - French - 50 pages

Yamaha MX61 Installation Guide - French - 4 pages

Yamaha MX61 User Manual - French - 15 pages

Yamaha MX61 User Manual - Italian - 48 pages

Yamaha MX61 User Manual - Portuguese - 48 pages

Yamaha MX61 User Manual - Spanish - 50 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info