571261
67
Zoom out
Zoom in
Previous page
1/71
Next page
File Utility RemotePerformance Song/Pattern
MX49/MX61 Reference Manual
Utility
General
MIDI
Controllers
Remote
Utility Job
QuickSeup
Factory Set
Version
67
Determines Controller Assign settings common to the entire system of the MX49/MX61. You can assign MIDI Control
Change Numbers to the Knobs on the front panel and external controllers. For example, you could use the ASSIGN 1
and 2 knobs to control effect depth for two different effects, while using the Foot Controller to control modulation. These
Control Change Number assignments are known as “Controller Assign.”
NOTE As for controllers that are not actually available on the instrument itself, they can be controlled by transmitting the corresponding
MIDI control number from an external MIDI controller.
Controllers
Parameter Description
FS Pedal
(Foot Switch Sustain Pedal
Select)
Determines which model of an optional Foot Switch connected to the [SUSTAIN] jack is recognized.
When the FC3 is used:
When you connect an optional FC3 (compatible with the Half Damper feature) for producing the special
Half Damper effect (as on a real acoustic piano), set this parameter to “FC3 (Half on).” If you don’t need
the Half Damper feature or want to disable it while still using an FC3, set this parameter to “FC3 (Half off).”
When the FC4 or FC5 is used:
Select “FC4/5.” The FC4 and FC5 are not compatible with the Half Damper feature.
Settings: FC3 (Half on), FC3 (Half off), FC4/5
NOTE
Note that this setting is not necessary when controlling the Half Damper feature via Control Change
messages from an external MIDI device to the instrument.
FS
(Foot switch Control
Number)
Determines the Control Change number generated by using a Footswitch connected to the [SUSTAIN]
jack. Keep in mind that if the same MIDI Control Change messages set here are received from an
external device, the internal tone generator also responds to those messages as if the Footswitch of the
instrument itself was used.
Settings: off, 1 – 95, arp sw, play/stop, PC inc, PC dec, octave reset
NOTE
An FC4 or FC5 connected to the [SUSTAIN] jack can be used to start and stop the Song/Pattern by
setting this parameter to “Play/Stop.” Also, an FC4 or FC5 can be used to switch Performances by setting
this parameter to “PC inc”/”PC dec.” Keep in mind that the sustain function cannot be used in these
cases.
AS1
(Assign 1 Control number)
AS2
(Assign 2 Control Number)
Determines the Control Change number generated when you use the ASSIGN 1/2 knobs. Keep in mind
that if the same MIDI Control Change messages set here are received from an external device, the
internal tone generator also responds to those messages as if the ASSIGN 1/2 knobs of the instrument
itself were used.
Settings: off, 1 – 95
FC1
(Foot Controller 1 Control
Number)
Determines the Control Change number generated when you use the Foot Controller connected to the
[FOOT CONTROLLER] jack. Keep in mind that if the same MIDI Control Change messages set here are
received from an external device, the internal tone generator also responds to those messages as if the
Foot Controller of the instrument itself was used.
Settings: off, 1 – 95
FC2
(Foot Controller 2 Control
Number)
Determines the Control Change number corresponding to a Foot Controller 2 on an external device
connected to the MX49/MX61.
Settings: off, 1 – 95
RB
(Ribbon Controller Control
Number)
Determines the Control Change number corresponding to a Ribbon Controller on an external device
connected to the MX49/MX61.
Settings: off, 1 – 95
BC
(Breath Controller Control
Number)
Determines the Control Change number generated when you use a Breath Controller on an external
device connected to the MX49/MX61.
Settings: off, 1 – 95
AF1
(Assignable Function 1
Control Number)
AF2
(Assignable Function 2
Control Number)
Determines the Control Change number generated when you use Assignable Function 1/2 buttons on an
external device connected to the MX49/MX61.
Settings: off, 1 – 95
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MX49 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MX49 in the language / languages: English as an attachment in your email.

The manual is 16,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MX49

Yamaha MX49 Installation Guide - English - 4 pages

Yamaha MX49 User Manual - English - 15 pages

Yamaha MX49 User Manual - English - 48 pages

Yamaha MX49 User Manual - German - 15 pages

Yamaha MX49 Installation Guide - German - 4 pages

Yamaha MX49 User Manual - German - 50 pages

Yamaha MX49 User Manual - German - 71 pages

Yamaha MX49 User Manual - Dutch - 71 pages

Yamaha MX49 User Manual - Dutch - 48 pages

Yamaha MX49 Installation Guide - French - 4 pages

Yamaha MX49 User Manual - French - 50 pages

Yamaha MX49 User Manual - French - 15 pages

Yamaha MX49 User Manual - Italian - 48 pages

Yamaha MX49 User Manual - Portuguese - 48 pages

Yamaha MX49 User Manual - Spanish - 50 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info