571261
64
Zoom out
Zoom in
Previous page
1/71
Next page
File Utility RemotePerformance Song/Pattern
MX49/MX61 Reference Manual
Utility
General
MIDI
Controllers
Remote
Utility Job
QuickSeup
Factory Set
Version
64
Utility
In the Utility display, you can set parameters that apply to the entire system of the MX49/MX61. To return to the
Performance display after making settings, press [EXIT].
Operation
Press [UTILITY] Select desired display for editing by using the Cursor [u]/[d] buttons Press
[ENTER] Edit parameters in selected display
General
Parameter Description
MasterVolume Determines the overall volume of the instrument.
Settings: 0 – 127
Note Shift Determines the amount (in semitones) by which the pitch of all notes is shifted.
Settings: -24 – +0 – +24
Tune
(Master tune)
Determines the fine tuning of the MX49/MX61s overall sound (in 0.1 cent steps).
Settings: -102.4 (414.7Hz) – +0.0 (440.0Hz) – +102.3 (466.8Hz)
NOTE
The frequency of the basic pitch (note A3) is 440 Hz. An increase of 3 or 4 cents corresponds to a
frequency increase of about 1 Hz.
DirectMonitor
(Direct monitor switch)
When using this instrument with a computer, this determines whether the audio signal of this instrument is
output or not to the OUTPUT [L/MONO]/[R] jacks and [PHONES] jack (Direct Monitoring). If you wish to hear
only the sound which is looped back from the computer via the USB [TO HOST] terminal, set this parameter
to off. You can use this setting when you want to apply a VST plug-in effect (on the computer) to the sound
of the instrument.
Settings: off, on
DAW Level Adjusts the volume of the audio data from the USB [TO HOST] terminal.
Settings: 0 – 127
WAV Volume Adjusts the volume of the audio data of the USB flash memory. This parameter is linked to the same
parameter of the Song display (page 58).
Settings: 0 – 127
Octave
(Octave shift)
Determines the amount in octaves by which the range of the keyboard is shifted up or down. This parameter
is linked with the OCTAVE [-]/[+] buttons on the panel.
Settings: -3 – +0 – +3
Transpose Determines the amount in semitones by which the range of the keyboard is shifted up or down.
Settings: -11 – +0 – +11
NOTE
If you transpose beyond the note range limits (C -2 and G8), notes in the adjacent octaves will be used.
VelCurve
(Velocity Curve)
Determines how the actual velocity will be generated and transmitted according to the velocity (strength)
with which you play notes on the keyboard.
Settings: norm, soft, hard, wide, fixed
norm (normal) .. This linear “curve” produces one-to-one correspondence between the strength of your
keyboard playing (velocity) and the actual sound change.
soft ................... This curve provides increased response, especially for lower velocities.
hard.................. This curve effectively lessens the overall response in comparison to the “norm” curve.
wide ................. This curve accentuates your playing strength by producing lower velocities in response to
softer playing and louder velocities in response to harder playing. As such, this setting
effectively expands the dynamic range.
fixed ................. This setting produces the same amount of sound change (set in “FixedVelocity” below), no
matter what your playing strength. The velocity of the notes you play are fixed at the value
set here.
FixedVelocity Determines the velocity value for the “fixed” Velocity Curve setting above. This can be used to send a fixed
velocity to the tone generator regardless of how hard or soft you play the keyboard. This parameter is only
available if you set Velocity Curve above to “fixed.”
Settings: 1 – 127
LCD Contrast Adjusts the LCD contrast.
Settings: 1 – 8
NOTE
You can also adjust the LCD contrast by holding down [UTILITY] and pressing [INC/YES]/[DEC/NO].
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MX49 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MX49 in the language / languages: English as an attachment in your email.

The manual is 16,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MX49

Yamaha MX49 Installation Guide - English - 4 pages

Yamaha MX49 User Manual - English - 15 pages

Yamaha MX49 User Manual - English - 48 pages

Yamaha MX49 User Manual - German - 15 pages

Yamaha MX49 Installation Guide - German - 4 pages

Yamaha MX49 User Manual - German - 50 pages

Yamaha MX49 User Manual - German - 71 pages

Yamaha MX49 User Manual - Dutch - 71 pages

Yamaha MX49 User Manual - Dutch - 48 pages

Yamaha MX49 Installation Guide - French - 4 pages

Yamaha MX49 User Manual - French - 50 pages

Yamaha MX49 User Manual - French - 15 pages

Yamaha MX49 User Manual - Italian - 48 pages

Yamaha MX49 User Manual - Portuguese - 48 pages

Yamaha MX49 User Manual - Spanish - 50 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info