707004

Yamaha MusicCast SUB100 - NS-NSW100 Manual

16
Zoom out
Zoom in
Previous page
1/22
Next page
16 En
If this unit is connected to a network, the firmware can be updated via the network. When new firmware is available, the
STATUS indicator flashes white when the power of this unit turns on. Use the following procedure to update the firmware.
NOTICE
Observe the following points during the update.
- Do not operate this unit
- Do not disconnect the power cord or the network cable
Firmware update procedure
1. On the rear panel, press A (STANDBY/
ON) to put the unit in standby mode.
2. On the rear panel, hold down CONNECT
for 10 seconds or longer.
The STATUS indicator and the Wireless LAN
indicator on the top panel flash, and the firmware
update begins.
When the indicator changes to steadily lit, the firmware
update is complete.
NOTE
● Firmware update takes about 10 or 20 minutes.
● If the internet connection is not fast enough, or
depending on the connection status of the wireless
network, the firmware update might take longer or might
fail.
● If the firmware update fails, the STATUS indicator
flashes red. Wait a while, and then try the operation
again.
■ Checking the firmware version
Here’s how you can check the version of the firmware
that’s installed in this unit.
1. On the rear panel, press A (STANDBY/
ON) to put the unit in standby mode.
2. On the rear panel, press CONNECT.
The STATUS indicator and the Wireless LAN
indicator on the top panel flash a number of times to
indicate the firmware version. For example if the
firmware version is 1.3, the STATUS indicator flashes
once and the Wireless LAN indicator flashes
three times.
NOTE
If the firmware version is 2.0, the STATUS indicator
flashes twice and the Wireless LAN indicator
remains unlit.
3. Press CONNECT once again to return to
standby mode.
OPTION SETTINGS
Updating the firmware
(rear panel)
(rear panel)
Major version
(flash yellow)
Minor version
(flash)
(top panel)
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MusicCast SUB100 - NS-NSW100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MusicCast SUB100 - NS-NSW100 in the language / languages: English as an attachment in your email.

The manual is 3,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info