713086

Yamaha MusicCast BAR 400 (YAS-408) Manual

59
Zoom out
Zoom in
Previous page
1/73
Next page
When any problem appears (Audio)
No sound
l Another input source is selected.
Select an appropriate input source. For details, see the
following:
– “Basic procedure for playback” (p.27)
l The mute function is activated.
Cancel the mute function. For details, see the following:
– “Basic procedure for playback” (p.27)
l The volume is too low.
Turn up the volume. For details, see the following:
– “Basic procedure for playback” (p.27)
l The power cord of the unit is not connected properly.
Make sure that the power cord of the unit is connected to an AC
wall outlet securely. For details, see the following:
– “Connecting the power cord” (p.21)
l Input jacks on a playback device are connected.
Connect the input jack on the unit and the output jack on the
playback device.
l Signals that the unit cannot play back are being input.
Change the digital audio output setting on the playback device
to PCM, Dolby Digital or DTS.
l The unit is configured so that HDMI audio input signals are
output from the TV.
Configure the unit so that HDMI audio input signals are output
from the unit. For details, see the following:
– “Configuring HDMI audio output” (p.44)
l The HDMI control function is disabled.
When connecting a TV that supports ARC (Audio Return
Channel) to the unit using an HDMI cable only, enable the HDMI
control function.
To output audio signals from the unit with the HDMI control
function disabled, connect the TV’s audio output jack to the
unit’s TV input jack (optical digital) via the optical digital audio
cable.
For details, see the following:
– “Configuring the HDMI control function” (p.43)
– “Connecting a TV that does not support Audio Return Channel
(ARC)” (p.19)
l Sound from an HDMI control-enabled TV is set for output
from the TV’s built-in speakers.
Use the TV’s HDMI settings to set audio output to any option
other than the TV’s built-in speakers.
No sound is coming from the subwoofer
l The subwoofer is not connected to an AC wall outlet.
Plug in the power cord of the subwoofer to an AC wall outlet.
For details, see the following:
– “Connecting the power cord” (p.21)
l The protection circuitry in the subwoofer has been activated.
To protect the product, the power of the subwoofer cannot be
turned on. Unplug the power cord from the AC wall outlet and
contact the nearest authorized Yamaha dealer or service
center.
l The playback source does not contain low-frequency signals.
Play back a sound source containing low-frequency signals,
and confirm that the sound is output from the subwoofer.
En
59
… 59 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MusicCast BAR 400 (YAS-408) at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MusicCast BAR 400 (YAS-408) in the language / languages: English as an attachment in your email.

The manual is 4,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info