571310
54
Zoom out
Zoom in
Previous page
1/80
Next page
MOXF6/MOXF8 Owner’s Manual
Quick Guide
54
Creating a Song with a computer
By using the MOXF6/MOXF8 with the DAW software on the
computer connected to the MOXF6/MOXF8, you can take
advantage of the following functions and applications.
MIDI recording and Audio recording of the MOXF6/MOXF8
performance to the DAW software on the computer.
Playing back a song of the DAW software by using the
MOXF6/MOXF8 tone generator
This section contains an overview on how to use DAW software
on the computer with the MOXF6/MOXF8 after connecting.
Setting up the MOXF6/MOXF8
1 If Quick Setup 1 is set to the default settings,
simultaneously hold the [QUICK SETUP] button
and press the Group [A] button.
This should be selected when recording your keyboard
performance to the DAW software on the computer. If Quick
Setup 1 is not set to the default settings, set as follows.
Audio settings
Use this setting when recording the signals from the tone
generator and the A/D INPUT [L]/[R] jacks separately to
DAW software, and playing the signals from the OUTPUT [L/
MONO]/[R] jacks directly.
MIDI settings
Use this setting when recording this instrument’s performance
(not including Arpeggio data) to the DAW software.
NOTE
For more details regarding these parameters, see the
“Reference Manual” PDF document.
2
Press the [STORE] button to store the settings to
internal memory.
3 Press the desired mode button for playing, and
then select the desired program for recording.
MIDI channels and MIDI ports
MIDI data is assigned to one of sixteen channels, and this
synthesizer is capable of simultaneously playing sixteen
separate Parts, via the sixteen MIDI channels. However, the
sixteen-channel limit can be overcome by using separate MIDI
“ports,” each supporting sixteen channels. While a single MIDI
cable is equipped to handle data over up to sixteen channels
simultaneously, a USB connection is capable of handling far
more—thanks to the use of MIDI ports. Each MIDI port can
handle sixteen channels, and the USB connection allows up to
eight ports, letting you use up to 128 channels (8 ports x 16
channels) on your computer. When connecting this instrument
to a computer using a USB cable, the MIDI ports are defined
as follows:
Port 1
The tone generator block in this instrument can recognize and
use only this port. When playing the MOXF6/MOXF8 as a tone
generator from the external MIDI instrument or computer, you
should set the MIDI Port to 1 on the connected MIDI device or
computer.
Port 2
This port is used to control the DAW software on the computer
from the MOXF6/MOXF8 by using the Remote Control feature.
Port 3
This port is used as the MIDI Thru Port. The MIDI data received
over Port 3 via the USB [TO HOST] terminal will be re-transmitted
to an external MIDI device via the MIDI [OUT] terminal. The
MIDI data received over Port 3 via the MIDI [IN] terminal will be
re-transmitted to an external device (computer, etc.) via the USB
[TO HOST] terminal.
Port 4
This port is used only for data communication of the MOXF6/
MOXF8 Editor. No other software or device can use this port.
Port 5
This port is used only for data communication of the MOXF6/
MOXF8 Remote Editor.
No other software or device can use this port. When using a
USB connection, make sure to match the MIDI transmit port
and the MIDI receive port as well as the MIDI transmit channel
and the MIDI receive channel. Make sure to set the MIDI port
of the external device connected to this instrument according
to the above information.
Audio channels
The audio signals of the MOXF6/MOXF8 can be output to the
USB [TO HOST] terminal and the OUTPUT [L/MONO]/[R]
jacks. When connecting to a computer, use the USB [TO
HOST] terminal. In this case, up to four audio channels (USB 1
– USB 4) are available. The output-to-channel assignments are
made in the [F5] USB I/O display of the Utility mode.
The audio signals of the MOXF6/MOXF8 can be input from the
USB [TO HOST] terminal and the A/D INPUT [L]/[R] jacks. Up
to two channels of audio can be input to the USB [TO HOST]
terminal. Set the output level by using the [DAW LEVEL] slider
on the MOXF6/MOXF8. The signals are output to the OUTPUT
[L/MONO]/[R] jack. Also, up to two audio channels can be
input
to the A/D INPUT [L]/[R] jacks. The signal is sent to the A/D
input
part of the MOXF6/MOXF8. For more details, see the
“Reference Manual” PDF document.
Recording your performance on the
MOXF6/MOXF8 to computer
Mode Direct Monitor SW
A/D In & Part Part
2StereoRec on on
Local Control off
MIDI Sync auto
Clock Out off
ARPOUTSw all off
KBDTxCh 1
TrIntSw all on
TrExtSw all on
54


Need help? Post your question in this forum.

Forumrules
1

Forum

yamaha-moxf8

Reset search

  • i notice on the grand piano and electric piano samples keys 17,18 and 19 have an extra ring to them and am not sure why Submitted on 8-4-2017 at 16:15

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOXF8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOXF8 in the language / languages: English as an attachment in your email.

The manual is 12,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOXF8

Yamaha MOXF8 Installation Guide - English - 5 pages

Yamaha MOXF8 User Manual - English - 14 pages

Yamaha MOXF8 User Manual - English - 57 pages

Yamaha MOXF8 Installation Guide - English - 6 pages

Yamaha MOXF8 Installation Guide - German - 5 pages

Yamaha MOXF8 User Manual - German - 14 pages

Yamaha MOXF8 User Manual - German - 57 pages

Yamaha MOXF8 Installation Guide - German - 6 pages

Yamaha MOXF8 User Manual - German - 80 pages

Yamaha MOXF8 User Manual - Dutch - 80 pages

Yamaha MOXF8 User Manual - French - 80 pages

Yamaha MOXF8 Installation Guide - French - 5 pages

Yamaha MOXF8 User Manual - French - 14 pages

Yamaha MOXF8 User Manual - French - 57 pages

Yamaha MOXF8 Installation Guide - French - 6 pages

Yamaha MOXF8 User Manual - Italian - 80 pages

Yamaha MOXF8 User Manual - Portuguese - 80 pages

Yamaha MOXF8 User Manual - Spanish - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info