571310
39
Zoom out
Zoom in
Previous page
1/80
Next page
MOXF6/MOXF8 Owner’s Manual
Quick Guide
39
5 Press [UTILITY] [F3] VCE A/D [SF1] OUTPUT,
then set the “Mono/Stereo” parameter.
This parameter determines the signal configuration for the
audio signal via the A/D INPUT [L]/[R] jacks, or how the signal
or signals are routed (stereo or mono).
When connecting the audio device as shown in step 2, set
this parameter to “stereo” or “LRMono.” When connecting
the microphone as shown in step 2, set this parameter to
“LMono.”
If necessary, set the other parameters.
NOTE For details about the parameters including Mono/Stereo,
see the “Reference Manual” PDF document.
NOTE The above parameter settings including Mono/Stereo are
applied to the entire Voice mode. If necessary, press the
[STORE] button to store these with the Utility settings.
NOTE The above parameter settings including Mono/Stereo differ
depending on the selected mode.
NOTE
For the Performance mode, set the above parameters on the
display called up via [PERFORM]
[EDIT] [COMMON]
[F5] A/D IN [SF1] OUTPUT. The settings will be stored
for each Performance.
For the Song/Pattern mode, set this parameter on the display
called up via [SONG] or [PATTERN]
[MIXING] [EDIT]
[COMMON]
[F5] A/D IN
[SF1] OUTPUT. The settings
will be stored for each Song/Pattern.
6 Press [UTILITY] [F1] GENERAL [SF6] OTHER,
then set the “Mic/Line” parameter according to
the equipment connected to the A/D INPUT [L]/[R]
jacks.
When connecting equipment of low output level (such as a
microphone, guitar, bass), set this parameter to “mic.” When
connecting equipment of high output level (such as a
synthesizer keyboard, CD player), set this parameter to “line.”
NOTE This setting is available for all modes. If necessary, press
the [STORE] button to store this with the Utility settings.
7 Press the A/D INPUT [ON/OFF] button so that its
lamp lights.
This setting enables audio signals to be input from the
connected audio device.
8 Press the [LEVEL] meter button so that the
[A/D
INPUT] lamp lights, then adjust the input level
by
using the [GAIN] knob.
NOTE Adjust the [GAIN] knob to raise the input level as far as
possible without allowing distortion to occur.
9 Press the [VOICE] button, then select the desired
Voice.
Play the keyboard wile you sing into the microphone or play
back the audio equipment.
10 If necessary, press the [STORE] button to store
the Voice.
Playing the keyboard along with
Vocoder
This instrument features a Vocoder function. This is a
distinctive, “robot voice” effect which extracts the
characteristic of the microphone sound and adds it to the
sound of your keyboard performance. In these example
instructions, you’ll learn how to use the Vocoder in the Voice
mode.
NOTE For details about the Vocoder, see the “Reference Manual” PDF
document.
1 Connect the microphone by following steps 1 – 8
on the previous page.
2 Press the [VOICE] button, then select the desired
Voice to which the Vocoder is applied.
This instrument features special Voices specifically designed
for use with the Vocoder. Call up the Category Search display
then select the desired Voice from the “Vocoder” Main
Category.
NOTE
If you use the Vocoder effect in the Performance/Song/Pattern
mode, assign the Voice for the Vocoder to Part 1. Vocoder
cannot be applied to any of the other Parts.
[LEVEL] meter button
[LEVEL] meter
39


Need help? Post your question in this forum.

Forumrules
1

Forum

yamaha-moxf8

Reset search

  • i notice on the grand piano and electric piano samples keys 17,18 and 19 have an extra ring to them and am not sure why Submitted on 8-4-2017 at 16:15

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOXF8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOXF8 in the language / languages: English as an attachment in your email.

The manual is 12,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOXF8

Yamaha MOXF8 Installation Guide - English - 5 pages

Yamaha MOXF8 User Manual - English - 14 pages

Yamaha MOXF8 User Manual - English - 57 pages

Yamaha MOXF8 Installation Guide - English - 6 pages

Yamaha MOXF8 Installation Guide - German - 5 pages

Yamaha MOXF8 User Manual - German - 14 pages

Yamaha MOXF8 User Manual - German - 57 pages

Yamaha MOXF8 Installation Guide - German - 6 pages

Yamaha MOXF8 User Manual - German - 80 pages

Yamaha MOXF8 User Manual - Dutch - 80 pages

Yamaha MOXF8 User Manual - French - 80 pages

Yamaha MOXF8 Installation Guide - French - 5 pages

Yamaha MOXF8 User Manual - French - 14 pages

Yamaha MOXF8 User Manual - French - 57 pages

Yamaha MOXF8 Installation Guide - French - 6 pages

Yamaha MOXF8 User Manual - Italian - 80 pages

Yamaha MOXF8 User Manual - Portuguese - 80 pages

Yamaha MOXF8 User Manual - Spanish - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info