571309
66
Zoom out
Zoom in
Previous page
1/80
Next page
66
MOXF6/MOXF8 Owner’s Manual
Appendix
When playing the keyboard in the Performance/Song/Pattern mode produces no sound, has a Voice been properly assigned to each
Part?
When Song/Pattern playback produces no sound, are the output channel of each Track in the play mode and the receive channel of
each Part in the Mixing mode set appropriately?
When Song/Pattern playback produces no sound, is the Velocity Offset setting of the Groove appropriate?
No sound from the A/D INPUT jack
Is the switch of the microphone turned on?
Check the microphone type. Make sure to use a dynamic microphone.
Is the cable between the microphone or audio equipment and this instrument properly connected?
Is the A/D INPUT [GAIN] knob turned fully counter-clockwise (to the minimum)?
Is the A/D INPUT [ON/OFF] button turned on?
Check whether or not the connection status of the A/D INPUT [L]/[R] matches the “Mono/Stereo” parameter.
Check whether or not the “Mic/Line” parameter is set to the appropriate value.
When the output level of the connected equipment (such as a microphone, guitar, bass) is low, set this parameter to “mic.” When the
output level of the connected equipment (such as a synthesizer keyboard, CD player) is high, set this parameter to “line.”
Are the volume settings of the A/D Input Part too low?
Are the effect settings appropriate?
Is the output setting of the A/D Input Part set appropriately?
Check whether or not the Vocoder Effect is selected.
When Vocoder is selected as the Insertion Effect for the current Voice or for Part 1 of the current Performance/Song/Pattern, the audio
signal input from the A/D INPUT jacks may produce no sound depending on the parameter settings.
Playback continues without stopping.
When the ARP [ON/OFF] button is turned on, press it so that its lamp is turned off.
When in the Song mode or Pattern mode, press the [J] (Stop) button.
When the click sound continues, check the following parameter setting. Set this parameter to something other than “all” because this
setting always plays back the click sound regardless of the sequencer status.
Distorted sound.
Are the effect settings appropriate?
Use of an effect at certain settings may produce distortion.
[PERFORM] [F2] VOICE
[SONG]/[PATTERN] [MIXING] [F2] VOICE
[SONG]/[PATTERN] [F3] TRACK
[SONG]/[PATTERN] [MIXING] [EDIT] Part selection [F1] VOICE [SF2] MODE “ReceiveCh
[SONG]/[PATTERN] [F2] GROOVE “VELO OFST”
[VOICE] [UTILITY] [F3] VCE A/D “Mono/Stereo
[PERFORM] [EDIT] [COMMON] [F5] A/D IN “Mono/Stereo”
[SONG]/[PATTERN] [MIXING] [EDIT] [COMMON] [F5] A/D IN “Mono/Stereo”
[UTILITY] [F1] GENERAL [SF6] OTHER Press [<] several times to call up the first page. “Mic/Line
[VOICE] [UTILITY] [F3] VCE A/D [SF1] OUTPUT “Volume”
[PERFORM] [EDIT] [COMMON] [F5] A/D IN [SF1] OUTPUT “Volume
[SONG]/[PATTERN] [MIXING] [EDIT] [COMMON] [F5] A/D IN [SF1] OUTPUT “Volume
[VOICE] [UTILITY] [F3] VCE A/D
[PERFORM] [EDIT] [COMMON] [F5] A/D IN
[SONG]/[PATTERN] [MIXING] [EDIT] [COMMON] [F5] A/D IN
[UTILITY] [F4] USB I/O
[VOICE] [F6] EFFECT “Ins EF Connect”
[SONG]/[PATTERN] [UTILITY] [F2] SEQ [SF1] CLICK “Mode”
[VOICE] [F6] EFFECT
[PERFORM] [F6] EFFECT
[SONG]/[PATTERN] [MIXING] [F6] EFFECT
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOXF6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOXF6 in the language / languages: English as an attachment in your email.

The manual is 12,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOXF6

Yamaha MOXF6 Installation Guide - English - 5 pages

Yamaha MOXF6 User Manual - English - 14 pages

Yamaha MOXF6 User Manual - English - 57 pages

Yamaha MOXF6 Installation Guide - English - 6 pages

Yamaha MOXF6 Installation Guide - German - 5 pages

Yamaha MOXF6 User Manual - German - 14 pages

Yamaha MOXF6 User Manual - German - 57 pages

Yamaha MOXF6 Installation Guide - German - 6 pages

Yamaha MOXF6 User Manual - German - 80 pages

Yamaha MOXF6 User Manual - Dutch - 80 pages

Yamaha MOXF6 User Manual - French - 57 pages

Yamaha MOXF6 Installation Guide - French - 14 pages

Yamaha MOXF6 Installation Guide - French - 6 pages

Yamaha MOXF6 User Manual - Italian - 80 pages

Yamaha MOXF6 User Manual - Spanish - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info