571309
42
Zoom out
Zoom in
Previous page
1/80
Next page
MOXF6/MOXF8 Owner’s Manual
Quick Guide
42
5
Press the [
F
] (Play) button to enter the Step Record
mode.
The [F] button lamp lights and the Step Record display
appears.
6 Set the “Step Time” to “480.”
The “Step Time” parameter determines to what position the
pointer will advance after a note has been entered. Here,
the pointer will advance in quarter-note steps.
7 Press the [P] (Top) button to return to the top of
the Song, then press the B0 key four times.
The Bass Drum Kick sound (assigned to the B0 key) is
recorded to the timing of each beat.
NOTE
If you are using the MOXF6, use the [OCTAVE] buttons to
make sure that the Bass Drum Kick sounds when you play
the B0 key. This is necessary since the MOXF6 has a
shorter keyboard and doesn’t have a B0 key.
8 Press the [J] (Stop) button to stop recording.
This returns to the Song Play display.
9 To record another percussion sound, press the
[REC] button then the [F] (Play) button to enter
the Step Record mode again.
The [F] button lamp lights and the Step Record display
appears.
10 Set the “Step Time” to “ 240.”
The Step Time parameter determines to what position the
pointer will advance after a note has been entered. Here,
the pointer will advance in eighth-note steps.
11 Press the [
P
] (Top) button to return to the top of
the Song, then press the [F3] REST button and
G 1 key four times.
An eighth-note rest is recorded to each down beat and the
Hi-Hat Cymbal sound (assigned to the G 1 key) is recorded
to each up beat.
NOTE
If you are using the MOXF6, use the [OCTAVE] buttons to
make sure that the Hi-Hat Cymbal sounds when you play
the G 1 key. This is necessary since the MOXF6 has a
shorter
keyboard and doesn’t have a G 1 key.
12 Press the [J] (Stop) button to stop recording.
This returns to the Song Play display.
After executing the above operations (steps 1 – 12), you
should now have a 1-measure drum phrase as shown below.
13
Press the [
P
] (Top) button, then press the [
F
]
(Play)
button to hear the recorded data.
To stop playback, press the [J] (Stop) button.
14
Press the [JOB] button, followed by the [F3] EVENT
button to call up the EVENT JOB SELECT display.
To create a four-measure drum pattern (which repeats the
recorded drum phrase), use the Copy Event Job.
15 Select “02: Copy Event” then press the [ENTER]
button.
16 Make the settings as listed below then press the
[ENTER] button to execute the Copy Event Job.
Source Track = “01”, Source range =
“001:1:000” – “002:1:000”
Destination Track = “01”, Top measure of the destination =
“002”
“NumberOfTimes” = “x 03”
Executing this Job will copy the drum phrase (recorded to
the first measure) to the 2nd, 3rd, and 4th measures
respectively.
17 Press in order the [SONG] button, [P] (Top)
button, and [F] (Play) button to hear the recorded
data.
To stop playback, press the [J] (Stop) button.
HINT
Tips in Step Recording
• In Step recording, you can also enter chords. Because notes
are actually entered when the keys are released, make sure
to press all correct keys you want to enter then release the
keys.
In Step Recording, press the [
F
] (Play) button to start playback
from the current position. In this status, pressing the [
J
] (Stop)
button will stop playback and return to the Step Record mode.
• In Step recording, you can create the legato phrases by
setting the GateTime to “100%.”
• In Step Recording, you can enter tied notes. For example,
first set the Step Time to “480” (quarter note) then press and
release the key. Next, change the Step Time to “240” (8th note)
then press the [F4] TIE button, resulting in a dotted quarter
note.
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOXF6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOXF6 in the language / languages: English as an attachment in your email.

The manual is 12,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOXF6

Yamaha MOXF6 Installation Guide - English - 5 pages

Yamaha MOXF6 User Manual - English - 14 pages

Yamaha MOXF6 User Manual - English - 57 pages

Yamaha MOXF6 Installation Guide - English - 6 pages

Yamaha MOXF6 Installation Guide - German - 5 pages

Yamaha MOXF6 User Manual - German - 14 pages

Yamaha MOXF6 User Manual - German - 57 pages

Yamaha MOXF6 Installation Guide - German - 6 pages

Yamaha MOXF6 User Manual - German - 80 pages

Yamaha MOXF6 User Manual - Dutch - 80 pages

Yamaha MOXF6 User Manual - French - 57 pages

Yamaha MOXF6 Installation Guide - French - 14 pages

Yamaha MOXF6 Installation Guide - French - 6 pages

Yamaha MOXF6 User Manual - Italian - 80 pages

Yamaha MOXF6 User Manual - Spanish - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info