707405
43
Zoom out
Zoom in
Previous page
1/80
Next page
MOXF6/MOXF8 Owner’s Manual
Quick Guide
43
Creating a bass part via Realtime
Recording
Next, record the bass line via Realtime Recording to Track 2.
1 In the Song Play mode, select the same Song
(created above) to which the Drum part has
already been recorded.
2 Press the [REC] button, followed by the [F1]
SETUP button, then set the parameters as below.
“Type” = “replace
“Quantize” = “240”
“RecTr” = “2
3 Press the [F2] VOICE button, followed by the
[CATEGORY SEARCH] button then select the Bass
Voice.
Set the “Main” (Main Category) to “Bass” then set the “Sub”
(Sub Category) to “Synth Bass.” Move the Cursor [>] button
to call up the Voice List. From this list, select “PRE3 E01 Uni
Punch” then press the [ENTER] button.
4 Press the [F5] CLICK button to turn the Click
() on.
5 Press [UTILITY] [F2] SEQ [SF1] CLICK, then
set the Click related parameters as below.
“Mode” = “rec”
“Beat” = “04”
“RecCount” = “1meas”
With this setting, there will be a one-measure lead-in count
before recording begins and the Click will play back only
while recording.
6 Press the [REC] button to return to the Song
Record display.
7 Press the [P] (Top) button to return to the top of
the Song, then press the [F] (Play) button to start
recording.
As soon as the lead-in count (1-measure) is finished, play
the following notation.
8 After playing the above notation, press the [J]
(Stop) button to stop recording.
If you play any wrong notes, press the [J] (Stop) button,
then try recording again. Repeat as often as necessary until
you get it right.
9 Press the [P] (Top) button followed by the [F]
(Play) button to hear the recorded data.
The recorded data of the Tracks 1 and 2 will be played back.
To stop playback, press the [J] (Stop) button. If you are not
satisfied with the recorded data, try this operation again.
HINT
Re-recording a specific part of a Song
(Punch In/Out)
Use the Punch In/Out recording method to record over only a
specific portion of the Track. If you set the start point (Punch In)
and end point (Punch Out), and then start recording from the
top of the Song, the actual recording will be done only between
the Punch In and Punch Out points. In the eight-measure
example below, only the third through the fifth measures are re-
recorded.
NOTE Punch In/Out Recording can only be used with Realtime
recording.
NOTE
Note that the Punch In/Out method always replaces
(destroys) the original data over the specified area.
To execute Punch In/Punch Out recording in the above condition,
set the following parameters beforehand on the [F1] SETUP
display in the Song Record mode.
“Type” = “punch”
Punch In = 003:01
Punch Out = 006:01
1234567 8
1234567 8
Recording start Recording stop
Before re-recording
Punch In point Punch Out point
After re-recording
Newly recorded data
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOXF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOXF in the language / languages: English as an attachment in your email.

The manual is 12,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOXF

Yamaha MOXF User Manual - German - 80 pages

Yamaha MOXF User Manual - Dutch - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info