707405
29
Zoom out
Zoom in
Previous page
1/80
Next page
MOXF6/MOXF8 Owner’s Manual
Quick Guide
29
1 Press the [EDIT] button in the Voice mode.
2 Edit the current Voice.
I When a Normal Voice is selected:
To edit Common parameters, press the [COMMON] button.
To edit Element parameters, press the desired Element
number button from [1] – [8].
I When a Drum Voice is selected:
To edit Common parameters, press the [COMMON] button.
To edit Key parameters, press the [1] button then press the
desired note on the keyboard.
NOTE
For details about the Voice parameters, refer to the Voice
mode chapter in the Reference Manual.
3 Assign the name to the edited Voice.
On the display called via [COMMON] [F1] GENERAL
[SF1] NAME, enter the desired name.
4 Store your edits as a User Voice.
Press the [STORE] button to call up the Store display. Set the
destination memory then press the [ENTER] button to execute
the Store operation.
NOTE
To cancel the Store operation, press the [EXIT] button before
pressing the [ENTER] button.
NOTICE
Never attempt to turn off the power while data is being written to Flash
ROM (while an “Executing...” or “Please keep power on” message is
shown). Turning the power off in this state results in loss of all user
data and may cause the system to freeze (due to corruption of data in
the Flash ROM).
Enhancing the sound with Effects
This instrument features a wide variety of Effects, letting you
add reverb and chorus processing to the selected Voice for
your keyboard performance. Simply changing the Effect
type applied to the preset Voice lets you instantly come up
with different sounds. The instructions below explain how to
set the Effect type and the related parameters applied to the
Preset Voice then store the settings as a User Voice.
1 In the Voice Play display, select a Voice then press
the [F6] EFFECT button.
The EFFECT display of Voice Common Edit appears.
2 Select the Effect Category and Type of Insertion
Effect A.
Move the cursor to the corresponding position as shown
below then use the [INC]/[DEC] buttons or [DATA] dial.
Basic Procedure for Voice Edit
Common Edit display
Element Edit display
Key Edit display
Indicates the Common Edit display.
Indicates the display for editing Element 1.
Indicates the Key Edit display.
Select a Key here.
Store display
Destination
Bank
Destination Voice
name
Destination Voice
number
HINT
Compare function
The Compare function lets you switch between the just-edited
Voice and its original, unedited condition, allowing you to hear
how your edits affect the sound.
I In the Voice Edit mode (with the [EDIT] lamp lit):
Press the [EDIT] button so that its lamp flashes. In this status,
the Voice settings prior to editing will temporarily be reinstated
for comparison purposes. Press the [EDIT] button again to
return to the original status.
I In the Voice Store mode:
Press the [EDIT] button so that its lamp flashes. In this status,
you can hear the sound of the Voice at the storing destination.
Press the [EDIT] button again to return to the original status.
Insertion Effect A Category Insertion Effect A Type
The current parameter and its value
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOXF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOXF in the language / languages: English as an attachment in your email.

The manual is 12,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOXF

Yamaha MOXF User Manual - German - 80 pages

Yamaha MOXF User Manual - Dutch - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info