707405
65
Zoom out
Zoom in
Previous page
1/80
Next page
MOXF6/MOXF8 – Bedienungsanleitung
Anhang
65
DEUTSCH
Fehlerbehebung
Kein Ton? Falscher Sound? Wenn Probleme wie diese auftreten, überprüfen Sie bitte erst die folgenden Punkte, bevor Sie
annehmen, dass das Produkt fehlerhaft ist. Viele Probleme lassen sich durch Ausführen von Factory Set (Seite 20) beheben,
nachdem Sie Ihre Daten auf einem externen USB-Flash-Speichergerät gesichert haben (Seite 60). Sollte das Problem weiter
bestehen, wenden Sie sich an Ihren Yamaha-Händler.
Kein Ton.
Ist dieses Instrument ordnungsgemäß über Audiokabel an die entsprechenden externen Geräte (z. B. Verstärker, Lautsprecher,
Kopfhörer) angeschlossen?
Da das Instrument keine integrierten Lautsprecher besitzt, müssen Sie ein externes Audiosystem oder Stereo-Kopfhörer anschließen,
um den Klang hören zu können (Seite 17).
Sind dieser Synthesizer und alle daran angeschlossenen externen Geräte eingeschaltet?
Haben Sie alle Lautstärkepegel korrekt eingestellt – einschließlich der Gesamtlautstärke an diesem Instrument und der Lautstärkeeinstellungen
an allen angeschlossenen externen Geräten?
Wenn der Fußregler an die Buchse [FOOT CONTROLLER] angeschlossen ist, betätigen Sie den Fußregler und prüfen die Lautstärke.
Prüfen Sie, wie der Parameter Local Control im Utility-Modus eingestellt ist.
Wenn dieses Instrument als eigenständiges Instrument verwendet wird und dieser Parameter ausgeschaltet ist, wird kein Ton erzeugt,
wenn Sie auf der Tastatur spielen.
Prüfen Sie, wie der Parameter Direct Monitor Switch im Utility-Modus eingestellt ist.
Wenn dieses Instrument als eigenständiges Instrument verwendet wird und dieser Parameter ausgeschaltet ist, wird kein Ton erzeugt,
wenn Sie auf der Tastatur spielen.
Wenn in den Modi Performance, Song oder Pattern kein erzeugt wird: Ist der Parameter „ ArpPlyOnly“ für jeden Part eingeschaltet?
Wenn dieser Parameter eingeschaltet ist, erzeugt der entsprechende Part nur über die Arpeggio-Wiedergabe einen Ton.
Sind die Werte für MIDI Volume und MIDI Expression zu niedrig, z. B. durch Verwendung eines externen Controllers?
Sind die Effekt- und Filtereinstellungen korrekt?
Ändern Sie bei Verwendung des Filters die Cutoff-Frequenz. Bestimmte Cutoff-Einstellungen können dazu führen, dass kein Ton mehr
ausgegeben wird.
Ist „Vocoder“ als Insertion-Effekttyp der Voice ausgewählt?
Falls ja, stellen Sie die Parameter für den AD-Part und die Buchse A/D INPUT auf die entsprechenden Werte ein, und spielen Sie
dann auf der Tastatur, während Sie in das angeschlossene Mikrofon sprechen. Überprüfen Sie, ob der Drehregler A/D INPUT [GAIN]
an der Rückseite in Minimalstellung steht.
Sind die Lautstärke- oder Expression-Einstellungen zu niedrig?
Sie die Parametereinstellungen wie Element Switch, Part Switch, Note Limit und Velocity Limit richtig?
[UTILITY] [F6] MIDI [SF2] SWITCH „LocalCtrl“
[UTILITY] [F5] USB I/O „DirectMonitorSw Part“
[PERFORM] [EDIT] Nummer [1]–[4] [F1] VOICE [SF2] MODE ArpPlyOnly?“
[SONG]/[PATTERN] [MIXING] [EDIT] Nummer [1]–[16] [F1] VOICE [SF2] MODE „ArpPlyOnly
[VOICE] [F6] EFFECT
[PERFORM] [F6] EFFECT
[SONG]/[PATTERN] [MIXING] [F6] EFFECT
[VOICE] [EDIT] Element/Key-Auswahl [F3] FILTER
[PERFORM] [EDIT] Part-Auswahl [F4] TONE [SF1] FILTER
[SONG]/[PATTERN] [MIXING] [EDIT] Part-Auswahl [F4] TONE [SF1] FILTER
[SONG]/[PATTERN] [UTILITY] [F2] SEQ [SF2] FILTER
[VOICE] [F6] EFFECT [SF1] CONNECT „InsEF Connect
[UTILITY] [F1] GENERAL [SF1] TG „Volume
[VOICE] [EDIT] [COMMON] [F2] OUTPUT „Volume
[VOICE] [EDIT] Element/Key-Auswahl [F4] AMP [SF1] LVL/PAN „Level“
[PERFORM] [EDIT] [COMMON] [F2] OUT/MFX [SF1] OUT „Volume
[PERFORM] [EDIT] Part-Auswahl [F2] OUTPUT [SF1] VOL/PAN „Volume“
[SONG]/[PATTERN] [MIXING] [EDIT] Part-Auswahl [F2] OUTPUT [SF1] VOL/PAN „Volume“
[VOICE] [EDIT] Element/Key-Auswahl [F1] OSC [SF1] WAVE „ElementSw
[VOICE] [EDIT] Element/Key-Auswahl [F1] OSC [SF3] LIMIT
[PERFORM] [F2] VOICE
[PERFORM] [EDIT] Part-Auswahl [F1] VOICE [SF1] VOICE „PartSw“
[PERFORM] [EDIT] Part-Auswahl [F1] VOICE [SF3] LIMIT
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOXF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOXF in the language / languages: German as an attachment in your email.

The manual is 12,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOXF

Yamaha MOXF User Manual - English - 80 pages

Yamaha MOXF User Manual - Dutch - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info