571303
49
Zoom out
Zoom in
Previous page
1/76
Next page
MOX6/MOX8 Owner’s Manual
Quick Guide
49
Connecting external MIDI
instruments
With a standard MIDI cable (available separately), you can
connect an external MIDI instrument, and control it from the
MOX6/MOX8. Likewise, you can use an external MIDI device
(such as a keyboard or sequencer) to control the sounds on
the
MOX6/MOX8
. Below are several different MIDI connection
examples; use the one most similar to your intended setup.
NOTE Any one of these interfaces can be used for MIDI data
transmission/reception: the MIDI connectors, or the USB [TO
HOST] connector. However, they cannot be used at the same
time. Select which connector is to be used for MIDI data transfer
in the “MIDI IN/OUT” parameter of the [UTILTITY] [F6] MIDI
[SF4] OTHER display. As you work through the explanations in
this chapter, set “MIDI IN/OUT” to “MIDI” since MIDI is used as
the example connection here.
Controlling MOX6/MOX8 from an external MIDI
keyboard or synthesizer
Use an external keyboard or synthesizer to remotely select
and play the Voices of the MOX6/MOX8.
Controlling an external MIDI keyboard or
synthesizer from the MOX6/MOX8
This connection lets you sound an external MIDI tone
generator (synthesizer, tone generator module, etc.) by
playing the MOX6/MOX8 or playing back the Song/Pattern of
the
MOX6/MOX8
. Use this connection when you wish to sound
the other instrument as well as the MOX6/MOX8.
MIDI [IN]
MOX6/MOX8
MIDI [OUT]
External MIDI keyboard such as an 88-key synthesizer
HINT
MIDI Transmit Channel and Receive Channel.
Make sure to match the MIDI Transmit Channel of the external
MIDI instrument with the MIDI Receive Channel of the MOX6/
MOX8. For details on setting the MIDI Transmit Channel of the
external MIDI instrument, refer to the owner’s manual of that
instrument. For details on setting the MIDI Receive Channel of
the MOX6/MOX8, check the following points.
In the Voice mode/Performance mode (using the MOX6/
MOX8 as a single timbre tone generator):
Check the MIDI Basic Receive Channel with the following
operation: [UTILITY] [F6] MIDI [SF1] CH (channel)
“BasicRcvCh.” If necessary, change this parameter to the same
number as the MIDI Transmit Channel of the external MIDI
instrument.
In the Song mode/Pattern mode (using the MOX6/MOX8 as
a multi-timbral tone generator):
Check the MIDI Receive Channel for each Part of the Multi with
the following operation. [SONG]/[PATTERN] [MIXING]
[EDIT] selection parts [F1] VOICE [SF2] MODE
“ReceiveCh.” If necessary, change this parameter to the same
number as the MIDI Transmit Channel of the external MIDI
instrument. Please note that all parts whose MIDI Receive
Channels are the same as the MIDI Transmit Channel of the
external MIDI instrument are sounded by your keyboard
performance. Change the settings of the desired parts to match
the MIDI Transmit Channel settings on the external MIDI
instrument.
MIDI [OUT]
MIDI [IN]
External MIDI tone generator such as MOTIF-RACK XS
MOX6/MOX8
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOX8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOX8 in the language / languages: English as an attachment in your email.

The manual is 11,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOX8

Yamaha MOX8 User Manual - English - 48 pages

Yamaha MOX8 Installation Guide - English - 6 pages

Yamaha MOX8 Installation Guide - English - 6 pages

Yamaha MOX8 User Manual - English - 11 pages

Yamaha MOX8 User Manual - English - 12 pages

Yamaha MOX8 User Manual - German - 57 pages

Yamaha MOX8 User Manual - German - 48 pages

Yamaha MOX8 Installation Guide - German - 10 pages

Yamaha MOX8 Installation Guide - German - 6 pages

Yamaha MOX8 User Manual - German - 14 pages

Yamaha MOX8 User Manual - German - 6 pages

Yamaha MOX8 User Manual - German - 76 pages

Yamaha MOX8 User Manual - Dutch - 1 pages

Yamaha MOX8 User Manual - Dutch - 76 pages

Yamaha MOX8 User Manual - French - 57 pages

Yamaha MOX8 User Manual - French - 76 pages

Yamaha MOX8 Installation Guide - French - 10 pages

Yamaha MOX8 Installation Guide - French - 6 pages

Yamaha MOX8 Installation Guide - French - 6 pages

Yamaha MOX8 User Manual - Italian - 76 pages

Yamaha MOX8 User Manual - Spanish - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info