Part ** is used for Split.This message appears when the Part switches of all Parts are set to on, and the Split function uses Part ** for the Split Part
in the Performance mode. The ** mark indicates the Part number.
Phrase limit exceeded.The maximum number of Phrases (256) has been exceeded when recording, executing a Pattern Job, or editing.
Please keep power on.The data is being written to Flash ROM. Never attempt to turn off the power while data is being written to Flash ROM.
Turning the power off while this message is shown results in loss of all user data and may cause the system to freeze (due
to corruption of data in the Flash ROM). This may also result in this instrument being unable to properly start up the next
time the power is turned on.
Please reboot.Please restart this instrument.
Please stop sequencer. The operation you have attempted to execute cannot be done during Song/Pattern playback.
Quick Setup ** applied.Quick Setup ** has just been applied to this instrument. The ** mark indicates the Quick Setup number.
Read only file.You have attempted to delete, rename, or overwrite a read-only file.
Receiving MIDI bulkThis instrument is receiving MIDI bulk data.
Scene & Arpeggio type
stored
The Song Scene and current Arpeggio type have been stored to one of the [SF1] – [SF6] buttons.
Sequence memory full.The internal memory for Sequence data is full, preventing any further operation (such as recording, editing, Job execution,
MIDI reception/transmission, or loading from the external storage device). Try again after erasing unwanted Song, Pattern,
or User Phrase data.
Too many fixed notesWhen converting the Song or Pattern data to the Arpeggio data, the amount of different notes in the data to be converted
has exceeded sixteen.
Transmitting MIDI bulkThis instrument is transmitting MIDI bulk data.
USB connection terminated.A break in the connection with the USB flash memory device has occurred because of an abnormal electric current.
Disconnect the device from the USB [TO DEVICE] terminal, then press the [ENTER] button.
USB device connectingCurrently recognizing the USB flash memory device connected to the USB [TO DEVICE] terminal.
USB device full.The USB flash memory device is full and no more data can be saved. Use a new USB flash memory device, or make
space by erasing unwanted data from the USB flash memory device.
USB device not ready.A USB flash memory device is not properly inserted in or connected to the USB [TO DEVICE] terminal.
USB device read/write error.An error occurred while reading or writing to/from a USB flash memory device.
USB device write protected.The USB flash memory device is write protected, or you have attempted to write to read-only media.
Utility storedThe settings in the Utility mode have been stored.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Yamaha MOX6 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Yamaha MOX6 in the language / languages: English as an attachment in your email.
The manual is 11,51 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
