571302
51
Zoom out
Zoom in
Previous page
1/76
Next page
MOX6/MOX8 Owner’s Manual
Quick Guide
51
3 Make sure that the USB [TO HOST] terminal of this
instrument is enabled.
Press the [UTILITY] button to call up the Utility mode, then
press the [F6] MIDI button followed by the [SF4] OTHER
button to call up the OTHER display. Set the “MIDI IN/OUT”
parameter to “USB.”
4 Set the input and output settings for audio data
and MIDI data as desired to suit your personal
preferences.
These settings can be set in the [F5] USB I/O display and
[F6] MIDI display of the Utility mode. Setting the parameters
related to the Audio data and MIDI data by using the Quick
Setup lets you instantly reconfigure the MOX6/MOX8 for
different computer/sequencer related applications by calling
up specially programmed presets. In this case, press the
[QUICK SETUP] button and then set the “SETUP.” After
making the settings, press the [ENTER] button to apply them
to the MOX6/MOX8.
NOTE
For details on the parameters set by the Quick Setup
function, see the “Reference Manual” PDF document.
5 Press the [STORE] button to store the settings to
internal memory.
Precautions when using the USB [TO HOST]
terminal
When connecting the computer to the USB [TO HOST] terminal,
make sure to observe the following points. Failing to do so risks
freezing the computer and corrupting or losing the data. If the
computer or the instrument freezes, restart the application
software or the computer OS, or turn the power to the instrument
off then on again.
NOTICE
Use an AB type USB cable
Before connecting the computer to the USB [TO HOST]
terminal, exit from any power-saving mode of the computer
(such as suspend, sleep, standby).
Before turning on the power to the instrument, connect the
computer to the USB [TO HOST] terminal.
Execute the following before turning the power to the
instrument on/off or plugging/unplugging the USB cable to/
from the USB [TO HOST] terminal.
Quit any open application software on the computer.
Make sure that data is not being transmitted from the
instrument. (Data is transmitted only by playing notes on
the keyboard or playing back a song.)
While the computer is connected to the instrument, you
should wait for six seconds or more between these
operations: (1) when turning the power of the instrument off
then on again, or (2) when alternately connecting/
disconnecting the USB cable.
MIDI channels and MIDI ports
MIDI data is assigned to one of sixteen channels, and this
synthesizer is capable of simultaneously playing sixteen
separate Parts, via the sixteen MIDI channels. However, the
sixteen-channel limit can be overcome by using separate MIDI
“ports,” each supporting sixteen channels. While a single MIDI
cable is equipped to handle data over up to sixteen channels
simultaneously, a USB connection is capable of handling far
more—thanks to the use of MIDI ports. Each MIDI port can
handle sixteen channels, and the USB connection allows up to
eight ports, letting you use up to 128 channels (8 ports x 16
channels) on your computer. When connecting this instrument
to a computer using a USB cable, the MIDI ports are defined
as follows:
Port 1
The tone generator block in this instrument can recognize and
use only this port. When playing the MOX6/MOX8 as a tone
generator from the external MIDI instrument or computer, you
should set the MIDI Port to 1 on the connected MIDI device or
computer.
Port 2
This port is used to control the DAW software on the computer
from the MOX6/MOX8 by using the Remote Control feature.
Port 3
This port is used as the MIDI Thru Port. The MIDI data received
over Port 3 via the USB [TO HOST] terminal will be re-transmitted
to an external MIDI device via the MIDI [OUT] terminal. The
MIDI data received over Port 3 via the MIDI [IN] terminal will be
re-transmitted to an external device (computer, etc.) via the USB
[TO HOST] terminal.
Port 4
This port is used only for data communication of the MOX6/
MOX8 Editor. No other software or device can use this port.
Port 5
This port is used only for data communication of the MOX6/
MOX8 Remote Editor.
No other software or device can use this port. When using a
USB connection, make sure to match the MIDI transmit port
and the MIDI receive port as well as the MIDI transmit channel
and the MIDI receive channel. Make sure to set the MIDI port
of the external device connected to this instrument according
to the above information.
Audio channels
The audio signals of the MOX6/MOX8 can be output to the USB
[TO HOST] terminal and the OUTPUT [L/MONO]/[R] jacks.
When connecting to a computer, use the USB [TO HOST]
terminal. In this case, up to four audio channels (USB 1 – USB
4) are available. The output-to-channel assignments are made
in the [F5] USB I/O display of the Utility mode.
The audio signals of the MOX6/MOX8 can be input from the
USB [TO HOST] terminal and the A/D INPUT [L]/[R] jacks. Up
to two channels of audio can be input to the USB [TO HOST]
terminal. Set the output level by using the [DAW LEVEL] slider
on the MOX6/MOX8. The signals are output to the OUTPUT [L/
MONO]/[R] jack. Also, up to two audio channels can be input
to the A/D INPUT [L]/[R] jacks. The signal is sent to the A/D input
part of the MOX6/MOX8. For more details, see the “Reference
Manual” PDF document.
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOX6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOX6 in the language / languages: English as an attachment in your email.

The manual is 11,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOX6

Yamaha MOX6 User Manual - English - 48 pages

Yamaha MOX6 Installation Guide - English - 10 pages

Yamaha MOX6 User Manual - English - 12 pages

Yamaha MOX6 User Manual - English - 6 pages

Yamaha MOX6 User Manual - German - 48 pages

Yamaha MOX6 Installation Guide - German - 10 pages

Yamaha MOX6 User Manual - German - 14 pages

Yamaha MOX6 Installation Guide - German - 6 pages

Yamaha MOX6 Installation Guide - German - 6 pages

Yamaha MOX6 User Manual - German - 76 pages

Yamaha MOX6 Additional guide - Dutch - 1 pages

Yamaha MOX6 User Manual - Dutch - 76 pages

Yamaha MOX6 Installation Guide - French - 10 pages

Yamaha MOX6 Installation Guide - French - 6 pages

Yamaha MOX6 Installation Guide - French - 6 pages

Yamaha MOX6 User Manual - Italian - 76 pages

Yamaha MOX6 User Manual - Portuguese - 76 pages

Yamaha MOX6 User Manual - Spanish - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info